0
Why is window ac losing cooling efficiency. Indoor air is 5 degrees warmer than desired temperature - AC is set at 22C temp is 26.?
Wiki User
∙ 11y ago
1.0 Ambient temperature may be more than 46 degree centigrade. <br>
2.0 Problem with ac e.g. scaling on condenser/evaporator tubes, chocking of radiator, gas leak etc.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How many degrees should your ac pull the room down?
It depends on the ambient temperature and the desired temperature. Subtract the desired temperature from the actual temperaturd to determine the number of degrees by which th air conditioner should cool the room.
How long will a 19kg propane gas cylinder last when heating for 12 hours a day at 60 degrees Fahrenheit?
That would depend on too many things that are no listed. Need to know what the desired temperature is.. What the BTU rating of the heater is, what the efficiency rating is, what the R value of the structure is.
What is the difference between Efficiency and Coefficient of Performance?
efficiency is capacity of engine to produce power from fuel supplied while cop is how effectively energy is used to obtain the desired effect
What are the factors that determine the amount of energy needed to raise the temperature?
Mass, heat capacity, the desired raise in temperature.
What infroemation is needed to calculate the amount of energy needed to heat a volume of water to some temperature?
You need the amount of water, the temperature of the water, and the desired temperature.
How many degrees should your ac pull the room down?
It depends on the ambient temperature and the desired temperature. Subtract the desired temperature from the actual temperaturd to determine the number of degrees by which th air conditioner should cool the room.
The desired temperature in a domestic cabinet is?
35 degrees celsius or 1.5 fahrenheit
What is an example of an environmental control?
An example of an environmental control is a thermostat that regulates heating and cooling systems to maintain a desired temperature in a building.
What are dieffrent types of insulators added to the roof?
Insulation helps to keep the desired temperature in the building. It acts as a barrier to heating or cooling loss.
How long will a 19kg propane gas cylinder last when heating for 12 hours a day at 60 degrees Fahrenheit?
That would depend on too many things that are no listed. Need to know what the desired temperature is.. What the BTU rating of the heater is, what the efficiency rating is, what the R value of the structure is.
What is difference between cooling load and heating load?
Cooling Load is the amount of energy that is to be extracted from a house to develop a conditioned environment. There are two types of cooling loads i.e, sensible cooling load and latent cooling load.... Heating Load is the amount of heat that is to be supplied to a house in order to increase its temperature to maintain desired temperature...
Why is cooling of computer chips necessary?
Cooling them allows them to run faster. A feature most desired by gamers.
How do you sous vide?
It is a cooking method where you immerse vacuum sealed food into water to slow cook it to a desired temperature. There is a thermometer in the water and another in the food. The water is heated to a specific temperature, say 160 degrees, until the internal temperature of the food reaches the desired temperature. This takes a long time and is monitored by a computer. Once the food is cooked the water is drained and replaced with cold water, say 30 degrees, to cool the product for storage.
What is the function of thermostat in refrigerator?
The thermostat senses the actual temperature in the fridge and compares it to the desired temperature (which the user sets on a dial), if the actual is above the desired it signals the compressor motor to run until the desired temperature is reached, when it stops the motor.
Why Engine temp gauge stays on cold in your subaru impreza?
Your car engine isn't getting up to the desired temperature, about 130 degrees Fahrenheit.
What is a thermostat for?
To make sure that the temperature is at the desired temperature
Why does a high-efficiency machine is more desirable than low-efficiency machine?
High efficiency means that a large percentage of the energy used is converted to something useful (the desired output of the machine), and a low percentage is wasted.High efficiency means that a large percentage of the energy used is converted to something useful (the desired output of the machine), and a low percentage is wasted.High efficiency means that a large percentage of the energy used is converted to something useful (the desired output of the machine), and a low percentage is wasted.High efficiency means that a large percentage of the energy used is converted to something useful (the desired output of the machine), and a low percentage is wasted.
