Why is my 1994 park avenue cutting off on me
Where is the best place to park your ATV after shutting off the engine
does not have one
The steering colums was changed on my 2000 buick park avenue and it still wont start. do I need to get the security light to go off first
You have to know something about what you are doing and take off lots of bolts.
start by taking the door panel off ....
in the passenger wheelwell, take off the tire
I have found using a socket with a racket wrench to be the easiest way to do it. When the tension is released the belt can be slipped off the tension pulley. The belt can be replaced the same way. Good luck.
Check your owners manual.
No.
What does the car sound like when you attempt to restart it? If the engine turns over normal, your injectors could be flooding out. If not, it has to be your crank sensor or the ignition control module.
Should be on the back side, 1 on each end that holds caliper to bracket. Just note how pads affixed as soon as they come off. Since they are just clipped on, they typically fall off when you clear the rotor.
turn ignition on leave it on for 10 minutes then switch ignition off then you start the car