Either the heater core is not getting hot, or the system is failing to divert air through the core. A simple check for the core is to feel the two heater hoses going into the firewall from a cold start. The two hoses should warm up at about the same rate and get uncomfortably hot. This is a good indication that the core is OK.
The next suspect is a common fail mode on the RAM with the blend doors that divert air through the core. Check heatertreater.net for a technical explanation of the operation of the various control doors and common fail mechanisms. The site will give you a good overview of potential problems and a fix once you diagnose the issues.
how do I replace block heater on 1995 dodge ram 2500
The heater box is all electric on a 2004 Dodge Ram.
The core is probably plugged.
we changed radaitor & thermastate , now heater blows cold air
If a Dodge Ram Van is not getting any heat, the first sign of it being the fault of the heater core would be a very wet passenger side floor board. The heater core is located near the foot well on the passenger side.
A 1999 Dodge Ram does not have a water control valve.
Yes
1997 dodge ram 1500 2wd 1500 engine block heater location
This frequently happens when the heater coil is going bad.
It has the intake heater.
Remove the water supply hoses from your 2002 Dodge Ram 1500 heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
heater core is more than likely leaking..