Want this question answered?
You have too much oil in your gas, that's why oil and gas is coming out your exhaust.
It is a gas/oil mix motor, you don't change the oil.
can someone tell me what the gas to oil mixture for a 48 spl Johnson boat motor is please
If its an oil injected motor there is a tank that holds the mixing oil if its just a straight carburated motor the oil mixes with the gas in a can then put it in the gas tank.
As long as the gas can was clean, then that would be ok.As long as the gas can was clean, then that would be ok.
50 to 1 oil to gas
50 to 1 or 2oz of oil to 1gallon of gas
1 quart of outboard / 2 cycle motor oil to 6 gallons of gas
The proper mixture for that motor is 50:1. Approximately 2.56 oz. of oil to 1 gallon of gas.......5.12 oz. of oil to 2 gallons of gas....etc..
If you have gas in your oil pan, then you probaby have gas in your oil. if you have gas in your oil, then you either have bad piston rings, or a bad carburetor (or injectors if the engine is newer). The way to check if you have bad piston rings is to see if you're blowing blue smoke out of your exhaust.
NO
The oil mixture for that motor is 1 pint of oil to 6 gallons of gas