There is a grounding strap beneath the starter that serves as the circuit between the vibration-mounted handle and the engine. If you take the handel apart, you will be sorry. Look for the broken wire at the coil in lower front corner first.
Depends on the saw... On a Stihl chainsaw there is a four position switch. Top position is OFF, second position is RUN/IDLE, third position is HALF CHOKE and the last position is FULL CHOKE. Hold the throttle in with your finger and move the switch down with your thumb. DO NOT try to move the switch down into choke WITHOUT holding in the throttle. On a Husqvarna chainsaw there is normally a switch that you pull out towards you. However, there have been models made that you have to push a switch downwards.
Use a chainsaw or welding torch.
It is blinking by a lamp first turning on, then turning off, then turning on, then turning off...
use a chainsaw
chainsaw its head off
not that i know of....hopefully
Buy a chainsaw.
chainsaw its head off
Use a chainsaw or welding torch.
chainsaw charlie time :D
Yeah, it's called a chainsaw!
use a chainsaw