Want this question answered?
Unknown
Ask teacher for answers
You can select the cable length in the option box.
The function of cable select jumper setting is to let the cable select which drive takes priority ("master") and which one comes after ("slave").
cuz' stone cold said so!
according to use
Master.
Answer: When using an 80-conductor cable-select cable, the drive nearest the motherboard is the master, and the drive farthest from the motherboard is the slave. You can recognize a cable-select cable by a small hole somewhere in the the data cable or by labels (master or slave) on the connectors. -CompTIA A+ Guide to Hardware, Managing, Maintaining, and Troubleshooting Fifth Edition 2010 copyright - Jean Andrews, Ph.D.
3 red lights only means your AV Cable is not correctly connected...I had this problem and rang a Tech he told me to check the AV connections..Problem solved.
Yes you can. Just connect it to the cable box, and set it up correctly.
This is a question from the A+ test!!!!!! The answer is that the cable is reversed at one end. The cable must be plugged in correctly at both the ends. The red wire on the cable shows the pin 1 end of the connector and must be plugged in correctly on the MB and the drive.
the cable is not inserted correctly