0
Why must you keep the filter assembly hot while you remove the charcoal?
Wiki User
∙ 13y ago
The filter assembly must remain hot when you remove the assembly or the solution contained within the assembly will crystallize to early.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Outline process for separating the three components of gunpowder.?
Gunpowder is a mixture of nitre (potassium nitrate) , sulphur and charcoalName of the method- filteration , evaporation and solvent extraction.Steps-1) Put the constituents in water. nitre will dissolve in water.2) Filter the soln.Filterate- water+nitreResidue - sulphur+charcoal3) Perform evaporation on the filterate.Water will evaporate leaving nitre.Solvent extraction-4) Put the residue in carbon disulphide.Sulphur will dissolve in this soln.5) Filter the soln.Filterate-carbon disulphide+sulphurResidue- charcoal6) Perform evaporation on the filterate.carbon disulphide evaporates leaving sulphur.in the form of a paragraph:-Answer: Gunpowder is a mixture of sulphur, charcoal and potassium nitrate (nitre). When water is added to the mixture potassium nitrate dissolves. The mixture is then filtered. The filtrate is potassium nitrate solution while the residue is a mixture of sulphur and charcoal. The filtrate is evaporated on a sand bath to obtain nitre back. When carbon disulphide is added to the residue, sulphur dissolves. When this mixture is filtered the filtrate is sulphur solution while the residue is charcoal. Leaving it open evaporates the sulphur solution. Carbon disulphide evaporates and sulphur crystals are left behind.
How does soil filter out copper?
The copper particles stick to the soil, while the water continues to filter through the soil. Therefore the copper stays in the soil while the water does not.
Does charcoal powder float in water?
Charcoal is actually heavier than water with a density ranging from 180kg/m3 to 220kg/m3 ,but wood charcoal is porous with many holes in it and contains air this helps in its floating while when air is removed by boiling it settles down
How do you get THC out your system while pregnant?
You should start taking charcoal pills. You can find them at any drug store or even at Walmart. Take them regularly for about two weeks and your system will be safely flushed. Charcoal pills are safe for the baby and carry unwanted materials out of the digestive system.
Chemical formula of gunpowder?
Gunpowder is a finely ground mixture of Potassium Nitrate (75%), Sulphur (10%) and Charcoal (15% w/w). The mixture burns extremely quickly, evolving gases which increase the reaction volume and thus make it a powerful propellant.
What does a charcoal filter do on a car?
It absorbs the gasoline vapors from the fuel tank while the car is parked. Once you start the car the vapors fromm the charcoal canister are purged back into your engine and burned.
How do you separate a mixture of charcoal from salt?
put this mixture in water. salt will dissolve in water. now filter this solution with a filter paper. we will get particles of charcoal on the filter paper as residue. now heat the solution of salt and water .the water will evaporate leaving behind salt. thus the mixture of charcoal and salt is separated.
What causes a Chevy C2500 to run rough while driving?
Fuel filter, air filter, gas line leak, charcoal filter or line, spark plugs, and timing.. I cant think of anything els right now, Good luck
While changing oil and filter in 2005 expedition you broke the filter now cannot remove it Can you tell you how to remove this filter?
I had this happen on my 2002 model. You need to use a long screwdriver and hammer to knock the screwdriver all the way through the filter. Use the screwdriver to turn the filter.
How do you remove the headlight assembly in order to replace a headlight bulb on a Pontiac Grand Am SE?
It depends completely on what year it is. If it is a composite style headlight (newer years), then the bulb should remove from the back of the assembly, while the assembly is left in the car. If it is an older year model, then the assembly is held in with two screws that can be reached from the front of the head light.
How do you install air filter for 1989 GMC vandura?
I've found no other way but to remove the doghouse and get it from there, but check the breather filter while you have the thing apart and replace it too. If the filter is not that old you can reach in from the engine area and remove the cover and turn the filter a quarter turn instead of replacing
How do you replace fuel line on John Deere Sb?
You have to remove the entire fender assembly. Remove the 2 hold down bolts under seat pan and the two hold down bolts down by where your feet rest on the fender pan. Also unscrew adjustment knob between legs in front of seat. Once fender assembly is removed you should have good access to fuel line. Replace fuel filter while you are at it.
How do you replace the fuel filter on a Chevy Blazer?
Depending on the year, the blazers fuel filter is most likely on the frame. While covering the connection with a rag, loosen the fuel lines from the filter. Remove the filter and replace, then reconnect the lines.
How do you change interior cabin air filter on 2005 Volvo s40?
The filter is located to the right of the throttle in the center pod(behind a cover to the right of where your foot would be while driving). You have to remove the the throttle then remove about 4 screws to remove the access cover. Once the cover is removed you pull the filter out install new and reverse removal procedure.
Is charcoal a good choice when buying a barbecue grill?
Buying a charcoal is best as you will have an unbeatable cooking control while using it. The hinged grill allows easy refueling with charcoal or wood chips.
Can a microwave charcoal filter be cleaned?
Mix your cleaning liquid by fill your bucket or pan with hot water and adding 1 cup of dishwashing detergent.Soak the carbon filter. Completely submerge your carbon filter inside of the pan or bucket and let it sit for 15 minutes.Shake the filter from side to side and then back to front while it is submerged. This will loosen up any dirt and grime particles inside.Rinse off the filter. Pull the filter out of the soapy solution and rinse it under hot water, shaking it the whole time. Make sure it is well rinsed.Place the filter in the sun to dry. If you're washing the filter in the winter, put it on a table inside the house.
Where is the drain plug for the transmission for a caviler z24?
Don't have one...Remove the transmission pan...Replace the filter while you are in there....You can also install a drain plug while the pan is off.
