Want this question answered?
No. If the load requires 168 W, then an 84 W inverter is not going to maintain the load.
No, a geyser is a resistive load.
No load is the least destructive load to a switch.
When using a resistive load bank to test a generator, it does not matter if you load the generator to its kW or kVA rating, because those two numbers are the same when considering a resistive load. Power factor, which is the difference between true and apparent power, only comes into play when there is a reactive (inductive or capacitative) load.
the ampere i=0is theonlyedge where the e0b and e0c can come together and share the load and that way the two vector diagrams will connected and the load will be less resistive and more on the ek0 and c73 resistive load. the 38f93 relay will be the one to break the load 2u3 and e0b and e0c into diffrent components that will be drawn in the diagram.
It is resistive much load
If we assume that the inverter is used in your car on 12 Volts DC and you are creating 120 VAC; and the 2500 watts refers to the AC side of inverter then for a resistive load Amps = Watts / Volts = 2500/120.
resistive loadAnswerIf the current is driving a motor, then the load is resistive-inductive.
For power control of inductive load.They can be successfully used for resistive load as well.
The PF will increase
No. If the load requires 168 W, then an 84 W inverter is not going to maintain the load.
No, a geyser is a resistive load.
the filament is made of tunguston which is having high resistance value,Hence it's resistive load
specification of inductive load,capactive load,resistive load in laboratory
No load is the least destructive load to a switch.
For a resistive load it is 120 Watts.
Inductive since it has a motor with windings.