Want this question answered?
Standard induction motor has a closed squirrel cage rotor, where as open ended induction motor has split phase rotor.
Squirrel cage induction motors.
Induction motor is an AC electric motor which uses electromagnetic induction to induce the electric current in the rotor to produce torque.
In a single phase electric motor, the centrifugal switch allows the start winding to be energized through the start capacitor when the motor is starting. This gives an out of phase magnetic field that, along with the in phase magnetic field from the run winding, helps the rotor to begin spinning. Once the rotor reaches a certain speed, the centrifugal switch changes state and cuts off the start winding. At that point, the motor continues running only through its run winding, and inertia keeps the rotor properly phase biased relative to the run winding's magnetic field.
short the rotor terminals.
Standard induction motor has a closed squirrel cage rotor, where as open ended induction motor has split phase rotor.
This is how an induction motor normally works, hence the name. The supply voltage is connected to the stator winding(s) and a current is induced in the rotor. A synchronous motor, on the other hand, will have current supplied to the rotor through slip rings and brushes. The rotor current is generally supplied as DC though, or else rectified in the rotor.
Yes, the induction motor has a rotor winding. It is usually one turn, shorted. This is how the magnetic fields generated in the stator induce a current in the rotor, which subsequently generates a torque from the opposing magnetic fields, stator to rotor.
Squirrel cage induction motors.
just put a auxilari winding on the rotor (in the salient pole)..
The synchronous motor is made self starting by providing a special winding on the rotor poles, known as damper winding or squirrel cage winding. AC supply given to the stator produces a rotating magnetic field which causes the rotor to rotate, therefore, in the beginning synchronous motor provided with damper winding starts as a squirrel cage induction motor. The exciter moves along the rotor. When the motor attains about 95%of synchronous speed, the rotor winding is connected to exciter terminals and the rotor is magnetically locked by the rotating field of the stator and the motor runs as a synchronous motor. While starting a synchronous motor, the field winding must be shorted through a suitable resistance so that the induced voltage is distributed throughout the whole winding and no part is subjected to the high voltage induced in the entire winding.
Like transformer induction motor has stator winding(Primary winding) and rotor winding(Secondary winding) separated by an airgap.Rotor winding(generally Al bars) are short circuited at the end to produce torque for the rotation.Hence the name short circuited transformer.
An induction motor consists of a rotor winding and stator winding. Rotor windings are short circuited and stator winding are given electrical AC supply .Now lets do the physics behind it . As the current starts to flow in the stator winding , magnetic flux start to produce around it . due to it's alternating nature that flux varies and according to farady law emf is induced in the rotor winding .Since the rotor winding is short circuited the current circulates in it .And when a current carrying conductor is placed in magnetic field it experiances a force and hence if start to rotate.
The Armature(or rotor) is a electromagnet inside a motor and alters the magnetic field inside the motor when it rotates. In DC motors it is connected to a Commutator. In AC induction motors the armature isn't connected to a power source.
Although the term 'conduction motor' isn't widely used, it refers to a motor whose rotor winding, as well as its stator windings, is supplied with an electric current. In the case of an 'induction motor', however, the current flowing through the rotor is produced by voltages 'induced' into the rotor windings by a rotating magnetic field created by the stator windings.
AC motor has two main winding components - stator and a rotor. Stator winding is stationary where as rotor winding is on rotating part.
No,look at the connection diagram for Universal motor. The Field and the armature windings are connected in series. But, in induction motor, the rotor end terminals are sorted by a kind of rings.That is rotor is apart from the supply.