Want this question answered?
change the pressure and/or the temperature of the gas
Think of a transformer as a foot pump. Putting pressure on it will cause it to pump air but you need to release the pressure to do it again. The transformer does the same for electricity, if DC is applied to it it will create one pulse of current from the output but that is all. You need the continues rise and fall of AC to work the pump.
Intrapulmonary pressure will equalize to atmospheric pressure during a breathing cycle, but intrapleural pressure should always be less than atmospheric pressure.
Your pressure should be taken 3 times in this case, not just once, and since the lower number was 88, it is likely stress
The air pressure should be lower inside than outide
You should put direct pressure on it first and then you should bandage it after.
15 Minutes.
You have to give ideal pressure and temperature. It liquefied in that conditions.
Use aloe. It takes the itching away when it is liberally applied for a few minutes.
about 30 to 45 minutes.
Mechanical pressure will not split water into its component elements.
100 psi
The system is applied to the targeted area, which is generally the waist, hips, or thighs, for 15 minutes.
what is the maximum amount of time a tourniquet should left on
Every 5 minutes for an unstable patient, every 15 minutes for a stable one.
If it helps the fuel pressure at the fuel rail should be 3.3-3.7 bar with the engine idling. The holding pressure after 20-30 minutes should be, system pressure - 0.5 bar.
The quickest and most efficient method is known as a blood choke. This is when you apply pressure on someones throat in a manner that there is pressure on the blood vessels but not the windpipe. If applied correctly, the other person should be unconscious after a few seconds and then wake up about a minute later. If this technique is done correctly, there should be no effects that last longer than a few minutes.