because it allows you to find the part of the slide you want to see, then you can zoom in by changing focus to see the frame in greater detail. if you don't start in low power it is extremely difficult to move around the slide
Do not allow the high power objective to tough the lenses
Scanning objective
Yes, it is recommended to store a microscope with the objective lens in place to prevent dust or debris from entering the lens threads and affecting the performance of the microscope. Additionally, storing the objective in place helps maintain the alignment and calibration of the microscope for accurate observations.
When viewing a specimen under the microscope, you should always start with the lowest magnification objective lens. This allows you to locate and focus on the specimen before moving to higher magnifications for a closer look.
You should always begin using a microscope with a lower power objective to locate and focus on your specimen more easily. Low power objectives provide a wider field of view, making it simpler to find the area of interest. Additionally, starting with lower magnification minimizes the risk of crashing the objective lens into the slide, which can damage both the slide and the microscope. Once the specimen is in focus, you can then switch to a higher power objective for detailed observation.
When working with a microscope you should always take procauctions but one question I am asked a lot is When working with a microscope do you open or close the diaphram when working with the medium- and high-power objective nobs? The answer is you keep it open if you don't you won't be abler to see any thing.
so the objective lens will not touch the slide.
10x
A microscope should be stored with the lowest-power objective lens in place to prevent damage to the higher-power lenses. It is recommended to keep the 4x or 10x objective lens in place for storage as they are less delicate than the higher magnification lenses.
low power objective lens to locate and focus on the specimen before moving to higher magnifications.
When focusing the microscope downward, you take the chance of damaging the expensive objective lens by crushing the slide trying to get it.
When beginning to focus a microscope, the stage should always be at its lowest position, and the lowest power objective lens should be in place to prevent damage to the slide and lens. Additionally, ensure that the light source is appropriately adjusted for optimal illumination. When replacing the microscope for storage, remove any slides, lower the stage, and rotate the lowest power objective into position to protect the lenses and ensure safe handling. Finally, cover the microscope with a dust cover to keep it clean and dust-free.