Should be tailshaft area trans.
Speed sensor. There is not a cable on this car.
Probably cable
When those things on my 92 B250 did not work, I replaced the speed sensor located on the transmission tailshaft and that fixed the problems. Hope that helped! Mark When the speedometer and odometer did not work in my 1990 B250, I had to replace the speed sensor, instrument cluster (speedometer) and replace a tiny gear (odometer) in order to get them working properly
do you mean your car won't display your car speed ? is that what you mean ? check the speedometer cable on your car. check the speed sensor located at the end of the speedometer cable. check the plastic gear inserted on the transmission at the end the speedometer cable. get a qualified technician who can work on your car.. it may require the instrument panel (gauges assy) be remove to unplug the other end of the cable..if cable type is used. some vehicles use wire and sensor.. if so, no need to remove gauges, just check sensor and the gears inserted to transmission.
There are several things that can cause your speedometer not to work. Begin by connecting a new speedometer cable. Make sure the speed sensor is operating properly.
check speedsensor mounted on transmission follow the cable will lead to the sensor
It is probably the speed sensor. It is located on the transmission and sends an electrical signal to the speedometer.
If the speedometer and odometer doesn't work I would suspect the VSS (Vehicle Speed Sensor) is faulty.If the speedometer doesn't work but the odometer does, I would suspect the gauge cluster is at fault.
spedo probIt could be the speed sensor located at the trans where the cable would normally be. Or your speedo head is dead. More than likely the first.
you may have a broken speedometer cable. you may have a broken speedometer cable.
There might be a problem with the cable.
It is an electronic speedometer. the sensor is located on top of the transmission. When I looked into getting a new one for my 89 it was about $80 new.