In the UK, we use three pin plugs. Neutral (blue cable), Positive (brown cable), Earth (green and yellow striped cable). Positive is also known as the Live cable. The Earth cable is an important safety feature that directs electricity safely to earth should a short-circuit cause the device's metal body (a toaster, for instance) to become live and a dangerous shock is possible to any one touching the device's metal body. Before the modern standard colouring was introduced, black was the neutral, red the positive, and green the earth. This old colouring can still be found in buildings built before the change-over.
in order to ground the faulty current in that line the third pin is designed.... that is simply called as neutral pin.
for perfect tight contact
Different pin configurations define different configurations of voltage and amperage. Your receptacle could be a three phase four wire grounding receptacle. To see more go to related linksbelow.
The earth pin is longer in a three pin plug so that when being plugged it it makes contact to ground the equipmemt before the other pins make the equipment live. If the equipment has a fault, the earth circuit is already in place to deal with it.
Connect a good quality three pin, 15 amps plug the geyser cable with green wire connected to the earth terminal (thicker pin in the plug). If the geyser is to be fitted permanently at one location only, then it is advisable to connect it with a D.P. Switch to avoid burning of wires due to loose connections in three in plug and socket.
No. Three phase service is something that you would need to request from your power company. You'd need to not only have service, you also need to have an electrician run 3 phase service into your home.
The typical household plug is made from pins: brass reason: cheap, wear and corrosion resistant and a good conductor (not compared to gold/silver/plat/copper) process: forging/casting (not sure) housing: ABS or PVC reason: cheap, easy to colour, corrosion resistant, easy to clean, hard wearing made process: injection molding.
Well, if it has 2 male pins, then it is a EU (European) plug. If it has 3 male pins, it is a UK plug.
The plug in pins on most processors are made of gold plated aluminum.
3 pins plug
my 2001 is at the middle bottom of radiator cover by rubber that are holding by 4 or 5 plastic pins
The 3 pin plug is used to connect (and eventually disconnect) various devices requiring an AC power supply to and from the main power supply.As the name suggests, the 3 pin plug consists of three pins :-Longer one, usually on the top for most standard plugs : is the earth [ E ]Left pin (Usually) : is the Line connection [ L ]Right pin (Usually) : is neutral [ N ]Next to the pins, on the plug, the three pins and their respective function is given by E, L and N.
as long as the pins are the same on the plug to socket you just push it in, when a plug has only 2 pins it is double insulated look for 2 squares one inside the other this is the symbol ;double insulated means no metal in casing on the appliance
To fit a 3-pin socket. The three pins are live, neutral and earth, which must not be confused.
Not normally, the pins are in a different configuration.
The little slit in the pins makes it flexible when it is inserted in the socket. It helps to make a good contact adjust itself in the socket.
A plug with 3 pins which can be inserted into the original UK plug.
Plastic does not conduct electricity.
Need to know voltage and type of plug to answer this question.