answersLogoWhite

0

Multiple leafs lets the manufacture vary the load capacity of the vehicle. Not all manufactures use multiples, I think Ford went to a single fiberglass leaf spring on the Ranger PU. Some front wheel drive have one single on the back that runs side to side.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What does the clutch center plate with spring hub do?

The clutch centre plate with spring hub help in holding the spring leaf spring in place in a vehicle.


Removing a 1986 celebrity steering wheel lock plate?

To take the lock plate off requires a lock plate spring compressor. With the spring compressor in place and the spring slightly compressed remove the circlip that holds the lock plate on. Then release the spring compressor and the lock plate simply slides off.


What is the function of torsion spring in the friction plate?

when the friction plate is pressed by the pressure plate a torsional vibration is developed in order to dampen this vibration torsional springs are provided in the spring plate this springs are also called damper spring.


How do you remove a 1986 celebrity steering wheel lock plate?

Use a spring compressor to push the lock plate down slightly, then remove the circlip that keeps the plate on. Release the spring compressor and the lock plate will come off. Reverse the procedure to reinstall.


Why a centre plate with a spring hub is used?

To keep the leaf spring in place and it doesnt fall a part


What size nut and bolt license plate?

Varies by manufacturer.


How do you measure elongation on steel plate?

Elongation on steel plate is typically measured by marking a gauge length on the plate and then subjecting it to tension until it fractures. The elongation is calculated as the difference between the final length of the gauge section and the original length, expressed as a percentage of the original length. This test helps to determine the ductility and deformation capabilities of the steel plate.


How do you change the spring in a AR magazine?

To change the spring in an AR magazine, first remove the floor plate and slide the old spring out. Insert the new spring into the magazine tube and ensure it is properly seated, then reassemble the magazine by replacing the floor plate. It's important to ensure the spring is correctly positioned to prevent feeding issues.


What is the weight of 50x100x500mm PVC plate?

It depends on the density of the PVC, which varies.


What does the magazine assembly of the M9 pistol consist of?

Nagazine tube (body) spring, follower, base plate, lock plate.


How do you replace the steering lock plate pin spring on a 1991 Chevy suburban?

To replace the steering lock plate pin spring on a 1991 Chevy Suburban, first, ensure the vehicle is in a safe position and disconnect the battery. Remove the steering wheel by loosening the retaining nut and using a steering wheel puller. Once the wheel is off, take out the lock plate by removing the retaining clip and pressing down on the plate to access the pin spring. Replace the old spring with a new one, reassemble the lock plate and steering wheel, and reconnect the battery.


How do you calculate the volume of a steel sheet plate?

the volume of a steel sheet plate is < length *breath *height >