The transistor is a three layer (or two junction) device, emitter, base, and collector (or other designations for variations such as FET's). Each layer is connected to a terminal. Three layers - three terminals.
A silicon transistor is a transistor made of silicon.
Similar to a 2N3906 PNP transistor
We do not use transitors from 4 to 10 ohms. We use resistors.
I believe that is resistor transistor technology TTL transistor transistor logic
It depends on the transistor, you just have to look at the data sheet for the transistor.
When the key is turn on there should be 12.5 volts on one wire (there are three wires). There is also a ground wire and a wire from the ECM for the transistor.
About 4 to 500 dollars.
A silicon transistor is a transistor made of silicon.
12-4 wire = 8
The active region of a transistor is when the transistor has sufficient base current to turn the transistor on and for a larger current to flow from emitter to collector. This is the region where the transistor is on and fully operating.
A Unijunction Transistor is a transistor that acts solely as a switch.
Similar to a 2N3906 PNP transistor
We do not use transitors from 4 to 10 ohms. We use resistors.
how does a transistor behaviour
Power transistor can conduct large amount of currents through it, more than small signal transistor. power transistor has a vertical structure and small signal transistor has horizontal structure.In power transistor quasi saturation region is present which is absent in the small signal transistor. In power transistor there is a inculsion of drift layer which is not there in the small signal transistor. Power dissipation is less in power transistor and it is more in small signal transistor. b.v.polytechnic,vasai pushkar vaity.
I believe that is resistor transistor technology TTL transistor transistor logic
I can give you several sentences.I bought a transistor radio.The transistor amplified the signal.We studied the transistor in science class.