pukimak
Discontinuous Reinforced Aluminum Composite DRA is an aluminum alloy reinforced with chopped fibers such as silicon carbide anywhere between 5% to 70% fiber by volume. Another more common name for this type of material is metal matrix composite, or MMC.
because carbon fibre is a light and yet strong material
Concrete is strong in compression, as the aggregate efficiently carries the compression load. However, it is weak in tension as the cement holding the aggregate in place can crack, allowing the structure to fail. Reinforced concrete solves these problems by adding metal reinforcing bars, glass fiber, or plastic fiber to carry tensile loads
Foam glass is made when air bubbles are put into the glass when it is melted . Fiber glass is glass that has been pulled into long strands.
Fibre reinforced plastic is often used in construction, automotive, marine and aerospace. It's made of a polymer matrix reinforced with fibres. Some examples of those fibres are glass, aramid, carbon and basalt.
It is a technology where we combine fiber and wireless technology seamlessly.
Yes. The transverse strength of an aligned fiber composite is very low compared to the longitudinal strength. This can be understood easily by considering that a pull in the longitudinal direction will be resisted by the fiber, which is normally very much more strong than the surrounding matrix. (To consider an analogy, think of a number of strings of different strengths held parallel to each other - A pull on these will be shared by each string, the stronger ones taking up the larger part of the load). To understand how a pull in the transverse direction is supported, consider a chain consisting of a large number of links that is being pulled. The pull is tranferred from one link to the next and so on. If any one of the links in the chain is weak of damaged, that will be the first to fail and will hence determine the strength of the chain (A chain is as strong as its weakest link). In the same manner, a pull in the transverse direction of an aligned composite will be transmitted repeatedly between fiber width and matrix and the interface between them. Thus the strength in the transverse direction will depend on which of the three (fiber, matrix, interface) will fail first. Since the matrix strength is normally very small as compared to the fiber, the transverse strength of the unidirectional fiber composite is low compared to the longitudinal strength. By the way, if the fiber fraction is very very small, it is possible that the strength is nearly equal in both directions.
Fiberglass is basically a plastic matrix strengthened with glass. It has the benefit of being both lightweight and strong.
Fiber Distributed Data Interface. . .
Do your own assignment! I know who you are
That is fiber optic cable, as FDDI stands for Fiber Distributed Data Interface
1. Carbon fiber fabric, and 2. a "matrix", or binder, such as epoxy, polyester, or vinyl ester.
A strong fiber is one that soes not break under tension easily. Some examples of strong fibers are:kevlarhempcarbonglassspiders silk
FDDI refers to Fiber Disturbed Data Interface. Most people will just say FDDI for short. Most hoping, that the person in conversation knows what it stands for.
its very strong
yes
William E Burr has written: 'Planning for the fiber distributed data interface (FDDI)' -- subject(s): Planning, Fiber Distributed Data Interface (Computer network standard), Local area networks (Computer networks)