trf cannot work on dc. the primary flux must vary for induction to occur in the
secondary winding.
howlunf
Transformer is the only device which is capable to stepup or stepdown an ac signal. That's why its used widely in ac supply.
A transformer is a device to convert high voltage AC to low voltage AC & vice-versa. It works on the principle of induction. Since induction occurs only in an AC supply, a transformer cannot work on DC.. So, it is not possible to convert DC supply to AC using transformer. You would need an inverter to convert DC to AC.
Transformer Power Supply
A transformer must be connected to an alternating current (AC) supply of the correct voltage.
power supply
Control transformer used only for control supply 110,220, 24,12V AC. But Potential transformer used voltage measurement purpose.
Depends on use,supply,AC,DC .Voltage,transformer ???
Transformers only work on ac supply because it principle is mutual induction. DC supply has constant magnitude whereas AC has alternating magnitude. so we can step up or step down current/voltage in transformer in ac only.
transformer will work on ac
whammy 2 specs. ps750 class 2 transformer Ac-Ac power supply input: 120vac 60Hz 12w output 9v AC 780mA
You don't. Transformers only work with AC voltage. Their input will be an AC waveform, and their output will be an AC waveform. Other electronics are used to convert the stepped down AC waveform from the transformer to DC.
The rectifier is what changes your AC into DC that the computer can use. Transformer raises or lowers the voltage. So you have 110 volts AC coming into your computers power supply. The Rectifier circuit in there changes the AC voltage to DC voltage but it is still to high for the computer use. The transformer lowers that voltage down to the various voltages that your computer needs