0
Binary is well suited for computers because it only needs two symbols to represent numbers a 1 and a 0. In a computer a circuit can be in 2 states on and off hence in the simplest implementation"on" represents a 1 and "off" a 0.
Wiki User
∙ 12y ago
Wiki User
∙ 13y agoBinary is well suited for computers because it only needs two symbols to represent numbers a 1 and a 0. In a computer a circuit can be in 2 states on and off hence in the simplest implementation"on" represents a 1 and "off" a 0.
Although it has been argued that 3 states would be the best number system for computers,, we still have to use a binary system, because we don't have the hardware necessary to work with a 3-states. All our digital electronics are binary since it is easy to represent two states. There is talk of 4 state quantum computers in which 'qubits' would be used.
Wiki User
∙ 7y agoComputers work with discontinous data i.e. data is not flowing continuously. Binary code (0=off, 1=on) expresses numerical or alphanumeric data that can be read, written, edited, and stored.
Modern computers use more complex digital forms, such as hexadecimal code, rather than simple binary, but it has the same binary basis.
Wiki User
∙ 12y agoComputer designers use binary format to represent information. When we speak of code, we are usually talking about the instructions in the programs themselves.
In an electronic computer, information has to be stored electronically. This is done by using transistor switches that can be thrown electronically to a desired position, on or off, and read later. Each piece of information stored this way is a binary digit, and the values that can be assigned to it are 0 or 1, represented by the switch being off or on. This binary digit is called a bit.
The digits can be combined into binary values of any length, but the commonly used length is eight bits, which is a byte. When information is stored in computer memory, it is usually in bytes or groups of bytes, with the individual bytes having address that can be accessed by numerical value.
The bits are usually represented using hexadecimal format, which is easily translated from binary and much easier for most human beings to handle. The numerals for this are 0 through 9 plus A through F, making 16 values. For people accustomed to decimal, this seems very cumbersome. But trying to work with computers in decimal at the level of the instructions themselves is sufficiently difficult that most experienced people don't try.
Wiki User
∙ 12y agothe computer is a electromechanical device.Basically it is an electronic device.So it understands only on and off.This on and off we represent as 1's and 0's,which are used in binary system.
So it is very much necessary to code the computer in binary.
Wiki User
∙ 11y agoThe binary number system was adopted for use in computers because it is the only thing computers understand.
Wiki User
∙ 13y agoIts the language computers use to do everything, everything is in binary and converted using the ASCII
Add your answer:
Earn +20 pts
What is the advantages of binary digits over the decimal?
Computers do not understand decimal notation. All information (both instructions and data) must be converted to a binary representation before the machine can understand it. We use the symbols 0 and 1 (binary notation) but the machine has a variety of physical representations it can use to encode binary data, including transistors, flux transitions, on/off switches and so on.
10011 is the binary number system way of writing?
Yes, Binary literally means 2 digits ( 0 and 1 ) - so 10011 (base 2) is equal to 19 (base 10) (Base 10 is what people use in everyday math; Base 2 is what computers use.)
What does Binary code use to create a type of Morse code that the computer understands?
Binary code is the native language of the machine; no translation is necessary. However, the binary encoded data may be abstract, high-level instruction code (program source code) that must be compiled or interpreted in order to produce the required machine code the computer understands. A software program is used to perform this translation; each programming language provides its own compiler and/or interpreter specific to each machine type and operating system (the platform).
What type of binary coding does Xusenet use?
Uuencode is the oldest code that xusenet uses to program it's binary coding and is considered a reliable source of coding by many of its many international computer users.
In what way does binary resemble a language?
Our computers are digital computers as opposed to analog computers. Digital computers process data and instructions made up of words or bytes which are composed of a number of bits. Normally 8 bits make a byte, either 2 bytes (16 bits) or 4 bytes (32 bits) make a computer instruction or a data word. It all depends on the computer design. The smallest piece of information (part of an instruction or data) is the bit. A bit represents something that can have two values. We call them "0" and "1". Because it can only have two values, we refer to the computer as a binary computer and its machine language as a binary language.
What Numbers that computers use to store and process data?
BINARY
What is the most basic code computers use?
Machine code e.g binary code 011100010001101010001100010001001001
What is the hexadecimal code?
This is a code that computer programmers use to better communicate with computers. Because computers operate on a binary code system that is difficult for humans to understand, a code that made communicating with computers easier.
Personal computers commonly use what code system?
Personal computers commonly use the binary code system. It relies on 1's and 0's to indicate an on and off pattern for the computer to process.
How can a Canadian computer talk with a Chinese computer?
Computers transmit information in binary code (also called "Machine Code") and then the computer's Operating System takes that binary code information and displays it in the language that the operator has chosen for it to be displayed it. All computers, regardless of language or country, use the same machine code.
Why do computers use the decimal system?
Computers use a binary system, not decimal.
What is the primary use for brinary code?
Binary code is the basic language of "ones" and "zeros" with which computers operate. It is useful to people working in computer science to know how to convert between binary and decimal notations, for various reasons involving basic fundamental operations of computers.
What is the purpose of binary codes?
A Binary code is a way of representing text or computer processor instructions by the use of the binary number system's two-binary digits 0 and 1.So the purpose of binary code is to issue human readable code, changed to machine code (binary) that the computer understands and can execute the instructions.
Do The earliest mainframe used the binary language?
All computers use binary.
Do computers today still use binary code?
The circuits in a modern computer processor are made up of billions of transistors. A transistor is a tiny switch that is activated by the electronic signals it receives. The digits 1 and 0 used in binary reflect the on and off states of a transistor where 0 can be represented by a low voltage and 1 with a high voltage.
Why computer use number system?
Computers cannot understand languages. They can only compute data. Because of that, we use binary code because that is pure data.
Where in the world uses the binary systems?
Everywhere. All computers use binary systems.
