If your starter free spins when you hit the start switch the most likely problem is the starter clutch. http://www.imagessite.com/OEM_Images/Yamaha_atv_images/00YFM350XMB7.gif
Pull the stator cover/assembly off, revealing the flywheel. Behind the flywheel is all of this stuff. You'll need a flywheel puller and this then slides right off. Part 9 is what fails, but can also result in missing teeth on the large gear(part 6) that mates with the starter gear (part 1). You may also want to rough up the raceway on part 6 where the starter clutch rollers engage. NO LUBRICANT HERE
No, the plugs are different.
1 and a half
it is right in front of the front sprocket. the cover has 3 bolts holding it on
A yamaha warrior does not have a timing. If it is backfiring like mine you have to get a diagnostics and something in the electrical system their is a switch that is turned off. IF you take it to a shop it will run you about 80-200 $$. I learned all this yesterday. Hope this helps. Antonio H
Warrior - 2002 is rated/received certificates of: USA:R
on a 2002 4 wh drive Blazer - disconnect the battery - lossen starter bolts ( 2 ) loosen and remove the Flywheel plate that the Starter is inserted into or you wont be able to pull the starter out - really tight space 2 bolts to remove this plate - plate has an opening that the starter goes into to engage the flywheel
Warrior Kings was created in 2002.
Hatchet Warrior was created in 2002.
Trojan Warrior was created in 2002.
Warrior Kings happened in 2002.
Ghost Warrior was created in 2002.
How to remove starter of 2002 Diamante.