Most likely bad bulb. 3 times it should come on. Turn the key to the on position, car running with brake set, and when fluid is low. The last can be simulated by removing the brake fluid cap from the reservoir and let it hang loose, just use a rag so it wont drip on the paint and peel it.
If these 3 fail to get a light you have to remove the console and replace the lamp.
Check my other responses for how to accomplish this.
The brake light is controlled by a relay switch. If the relay switch is bad the brake lights will stay on. The brake light switch simply plugs in and out. Unplug the brake light switch until you can replace it.
The brake light switch is broken or out of adjustment.
is your e-brake on?
Might be a stuck brake light switch its located at the top of the brake pedal
The brake light switch might not be connected properly. Remove the brake light switch for 10 seconds and replace it to its original position.
Brake light switch went bad.
yes you just wont have power stearing if you do
The brake light switch is broken or out of adjustment. The brake light switch is attached to the brake pedal lever above the brake pedal pad.
Check the brake light switch down on the brake pedal.
check the wires at brake light switch on brake pedal they are bad about breaking brake light switch
Brake light switch is broken or needs adjustment.
Check the brake light switch adjustment.