0
it is Likely that an error was made or there is a failed or damaged part in the system.
I have seen all the following failures in order of probability:
- The brake pads are reversed inside for outside
- one or more of the brake calipers seized from a build up of crud inside when compressed to fit the new pads
- The caliper was put back on incorrectly and when the wheel was bolted up the rotor is far enough off centre in relation to it locks up
- During the repair the rubber hoses were damaged and will not allow the fluid to return to the master cylinder
- The master cylinder was damaged or has become maladjusted during the repair. Old dirty fluid forced back through it will do this.
- Dirty fluid was forced into the anti lock brake pump and it is causing the problem.
- The wheels were changed position on the car and there is specific front and rear wheels.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Why do brake pads squeak after replacing pads?
Why do brake pads squeak after replacing pads?
Change front brake pads on a 2002 Nissan Sentra?
How do you change brake pads on a 2002 Nissan Sentra? How do you change brake pads on a 2002 Nissan Sentra? How do you change brake pads on a 2002 Nissan Sentra?
Squeaking noise when brakes are applied on 2002 dodge?
Inspect the brake pads. They are probably worn out and need replacing.
How do you replace brake-pads on VW Beetle 2002?
how do you replace brake-pads on vw beetle 2002?
Changing brake pads 2002 dodge pickup?
how do change brake pads on a 2002 dodge pickup 4x4
Can you tell me what brake pads are?
Brake pads are the pads that sit on top of the rotor that when the brake pedal is pressed the brake pads squeeze the rotor and the car stops. Signs that they need replacing are if you hear squeaking when pressing the brake pedal.
Installing Brake Pads on a 2002 GMC Envoy?
How to change brake pads on 2002 GMC Envoy front brakes.
How do you install brake pads on 1982 cutlass?
Replacing the brake pads on your 1982 Oldsmobile Cutlass is quite easy. Remove the brake pad Springs and caliper. The brake pads will come off. Reverse the process to install the new brake pads
How do you change the rear brake pads on a 2002 Chevy Avalanche?
Answering "How do you change the rear brake pads on a 2002 Chevy Avalanche
How do you bleed the brake lines after replacing brake pads on a dodge Dakota?
If you did not open any brake lines and only replaced the pads there is no need to bleed the system.
What is a good store to purchase brake pads?
A good store to purchase brake pads from is Parts Source. You can even ask the employees for tips and pointers if you are not completely confident in replacing brake pads.
Do you need a torque wrench when replacing pads and rotors?
You do not need a torque wrench when replacing brake pads and rotors. Some of the tools needed to change the rotors and pads are the c-clamp, sockets, wrench, grease, and brake cleaner.
