Top Answer
User Avatar
Wiki User
Answered 2009-12-16 04:00:36

you blew out a fuse under the hood just change it and it should work


Your Answer

Related Questions

turn the parking lights on and off 3 times

I believe that it is illegal to run fog lights and high beams together, however I could be wrong.

replace rear tail light bulb

Remove old lights and install new ones. Use small hands.

Does the car have fog lights? I have a 2003 Sunfire that the high beams would not work on. This was caused by a short in the fog light wiring. I had the fog lights rewired separate from the harness (about $100) and the problem was fixed.

dash lights radio info center lights do not work all the time. change the fuse but that did not solved the problem

no lights only hige beams if i hold handle up

Our 2003 Impala has brake pads.

The 2003 Chevrolet Impala has 12 valves.

The 2003 Chevrolet Impala has a V6 engine.

The BCM (Body Control Module) of the Passlock system is malfunctioning. It will need to be replaced. I just had it done to my '03 Impala.

You need to replace the DRL (Daytime running light) Module

The 2003 Chevrolet Impala is a gas-powered vehicle.

The 2003 Chevrolet Impala has overhead valves (OHV).

The 2003 Chevrolet Impala has a 4-speed automatic.

While the ignition is in the ON position, follow this sequence:Turn your headlights to the parking position and then OFF 3x's.

A 2003 Impala does not have a timing belt. It has a chain.

The 2003 Impala has a 17 gallon fuel tank

The 2003 Chevrolet Impala has a drag coefficient of .30 Cd.

The curb weight of the 2003 Chevrolet Impala is 3389 lbs..

The height of the 2003 Chevrolet Impala is 4 ft. 9.3 in. (57.3 in.).

The 2003 Chevrolet Impala runs on regular unleaded.

The 2003 Chevrolet Impala is 16 ft. 8 in. (200 in.) long.

where is the PVC valve on chevelet impala 2003

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.