0
Why would a 1984 cutlass supreme v6 click and then sound like it want to start but don't?
Wiki User
∙ 11y ago
The 'click' is probably the sound of the starter solenoid, but if nothing else happens, either the battery is flat, or the starter motor is faulty. -First check battery charge with a meter, charge it if needed. If the battery is good then check the connections at starter, make sure it has a good ground. If still not working , remove the starter and bench test it. -follow procedures in your manual for this.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What are some things to check when 1991 Oldsmobile Cutlass Supreme won't start?
The most obvious thing to check when a 1991 Oldsmobile Cutlass Supreme won't start is to make sure that the vehicle has gas. You should also check the battery. If the car clicks when you try to start it, it is likely the alternator.
What can i do to get a 88 Oldmobile cutlass supreme to start i just had the coil packs changed what else could it be?
Check the crank sensor
WhyOldsmobile Cutlass Supreme won't start then will start later?
It might be a starter going bad. Had the same problem and was told that it just needed a new starter.
Which Application test Sound card?
click start> run> then type dxdiag, then press enter, then click on the sound tab.....
How can you change the start up sound on your computer?
Go to Control Panel and double click on "sound". Click the "sounds" tab.
1985 Oldsmobile cutlass supreme will not start?
be more specific what kind of noise if any at all wont turn over ? it will not even crank up
Your fuel pump is really loud 1989 cutlass supreme where is it and how do you change it car hard to start in morning?
Located in the fuel tank remove to access
Why does my 97 Oldsmobile cutlass supreme miss when going uphill?
Could be in need of a tune up. Start with replacing the spark plugs and spark plug wires.
How do you change the sound your email makes when you get it?
If you are using Windows, go to start / settings / control panel. Click the sound icon. Click the sound tab and change the "New Mail Notification."
How do you reset sound on Windows 7?
Click the speaker on your start menu bar close to the clock to adjust or mute your Windows sound. Or search in your start menu for sound to enable/disable devices. Also found in the Control Panel.
How do you change window startup sound?
Go to control panel, double click on Sounds and Audio Devices, then click on the Sounds tab. Scroll down until you find the "Start Windows", click it, click browse, and then select the sound you want as your startup noise, then click ok
How do you access Device Manager in windows 7?
Click Start, then Devices and Printers from the pop-up start-menu !An alternative way is to click Start, then Control Panel, then Hardware and Sound, then Devices and Printers
