0
the circuit breaker spark when it comes an over load, loss contact,but the probable cause is loss contact...and also the circuit breaker is going to be damage or destroyed.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the device to break a circuit?
Switch (mechanical or electrical), breaker or fuse.a switch
What property would you be testing for if you are using a circuit breaker?
A circuit breaker is not a test instrument, it is a kind of switch that interrupts the supply when that is needed, but it is more than that because circuit breakers are specialised items, and examples exist that can interrupt currents of hundreds or thousands of amps at very high voltage.
What would cause a short periodic low hum to come from a circuit breaker?
A bad circuit breaker. Replace it.
What would happenif you put an 8 amp circuit-breaker in a power circuit?
The circuit would be protected up to 8 amps before the breaker would trip. Any more that 8 amps and the circuit would open and shut the circuit off.
What is an example of a circuit interrupter?
An example of a circuit interrupter would a fuse or circuit breaker.
What is the device to break a circuit?
Switch (mechanical or electrical), breaker or fuse.a switch
What is a switch that automatically opens if the current is to high?
That would be a circuit breaker.
Why does your electrical breaker sparks?
If your breaker is sparking it could be loose on the bottom center where it connects to the busbar. The wire going out to the circuit could be loose under the screw terminal. Your breaker should not spark under normal usage. If it continues to spark, you should replace it. When turning off a breaker you are interrupting the flow of current in the circuit, which would create a spark, because the current wants to continue flowing. However, the spark is contained inside the breaker where you cannot see it.
What do you call a push button switch that you push on when power supply shut down you have to push it on again?
That would be a breaker, as in circuit breaker. Just like the ones on your house.
What is the role of a switch?
A switch is installed in a circuit to stop the current flow. Without the switch there is no way to disconnect the operation of the circuit's load. In modern households the switch is a convenient way to control room lighting from a convenient location. Without switches the circuit power would have to be controlled from the service distribution panel's breakers. In this scenario the breaker would be in the same class as a switch.
What would cause a circuit breaker heating element to trip off?
There are two conditions that would cause a breaker to trip off. One is an overload of the circuit and the other is a short circuit on the circuit. The heating element within the breaker is what monitors for circuit overloads.
What property would you be testing for if you are using a circuit breaker?
A circuit breaker is not a test instrument, it is a kind of switch that interrupts the supply when that is needed, but it is more than that because circuit breakers are specialised items, and examples exist that can interrupt currents of hundreds or thousands of amps at very high voltage.
What would cause a short periodic low hum to come from a circuit breaker?
A bad circuit breaker. Replace it.
Can a Circuit breaker be used as a Switch?
Yes a circuit breaker is a switch but it should not be used as a switch. The continuous turning off and on of a breaker weakens the internal mechanism and reduces the tripping value of the breaker. There is in the marketplace breakers that are designed to be used as switches. These are usually used in large warehouses where the lights are turned on in the morning and shut off at night. Using these specifically designed breakers for switches does not wear out the tripping mechanism or reduce the tripping value. <<>> A circuit breaker can be used as a switch, although in most cases there are less expensive switches you can use.
What would happenif you put an 8 amp circuit-breaker in a power circuit?
The circuit would be protected up to 8 amps before the breaker would trip. Any more that 8 amps and the circuit would open and shut the circuit off.
What is an example of a circuit interrupter?
An example of a circuit interrupter would a fuse or circuit breaker.
How do you hook up wire from ansul system to shunt trip breaker?
You would need to take the "input" wire for the shunt trip breaker to an electrical switch (not alarm initiating switch, which are DC voltage rated) within the Automan unit and connect to the "Common" connection and the "return", the wire to the actual shunt circuit of the breaker, from the "Normally Open" connection of the switch. When the unit activates, the switch will be placed into "Closed" position, therefore completing the circuit and activating the shunt coil.
