One would need to use floor liners when installing new floors to prevent dirt, snow, sand and many other unwanted debris to deform sink under the floor and deform it.
It would depend on the type of floor you are installing. There haven't been enough details about the project provided to answer this question thoroughly. If you are installing engineered hardwood just lay down a 3/4" piece of plywood and a moisture barrier. If you are installing a floating floor, use a moisture barrier and two 1/2" pieces of plywood. see related links
Typically the 40 story building would have 40 floors. However, this depends on the building and whether or not they skip the 13th floor. It also depends if you choose to count the basement.
B/c suddenly higher floors became useful. With only stair access, not many people would be willing to go past the 4th floor.
Engineered wood floors are made of a plywood with a layer of solid wood on top. These floors allow wood to go where traditionally it could not like a cement sub floors or a sub grade level of your home. Engineered wood is sometimes called a remodel floor because it is more often thinner then solid hardwood. This allows a homeowner to more easily transition between floors that are close in height. They can be refinished, although depending on the thickness of the wood top, it may need to be professionally done. These floors are almost always prefinished. You will find engineered wood floors that are glue down, floating, and staple down. Another benefit of engineered wood is cost. Some more exotic species of wood are very expensive. Engineered woods allow manufactures ways to produce floors in a more budget friendly floor. Solid hardwood floors have time on their side. The tongue and grove style boards have been used in homes for generations. The live expectancy of the floor is 100 + years with proper care. They allow for much easier repair then a laminate or engineered wood and can be easily refinished my an informed DIY. In the past, you only saw solid would in floors 3/4" or even thicker. Today though, there are solid wood floors as thin as 3/8" which allow it to go into an area a ticker floor couldn't. You can find solid wood unfinished if you wish to stain it and polyurethane it yourself or prefinished for quicker installation. Engineered wood floors are made like plywood. They are made up of several layers, mostly of a less expensive wood. The top layer is made of hardwood. Solid hardwood floors, on the other hand are solid hardwood the entire thickness. An engineered wood floor may have only 1/16" or so of hardwood on the surface, where a solid wood floor might be a 1/2" or more. Engineered wood tends to be more stable - it is less likely to move or warp with changes in humidity or temperature. This is because the different layers of wood have the grain running in different directions. They are a good choice over a cement slab floor, and are frequently installed by being glued down.
No it's impossibleEdit: I would have to disagree with this answer. Typically, you would not glue click lock hardwood floors, but if the floor is level and even you could both click it and glue it. It's not necessary, but you could do it.ANS 3 - If the click-lock flooring is laid properly it should be on thin wavy foam sheet. -It's supposed to 'float' ! If this is left out and the laminate is glued to sub floor, chances are good that it will start to separate in much used areas. -NOT a good idea to glue it
form_title=Floor Installation form_header=Those shoes were made for walking on your brand new floors. Find a flooring professional in your area. What type of floor would you like to have installed?=_ Where are you installing flooring? =_ What is on the floor currently? =_ Desired Start Date=_
I would suggest purchasing decorative heated rugs instead of installing heated floors. It can save you a whole lot of money.
form_title= Floor Sanding form_header= Sand your floors for a smooth floor. How much area needs to be sanded?*= _ [50] Have you ever had your floors sanded?*= () Yes () No When would you like the floors sanded?*= _ [50]
Installing hard wood floors can be extremely tedious. I would recommend having someone install them for you.
form_title=Bamboo Flooring form_header=Go green with bamboo flooring. Install a bamboo floor with help from flooring experts. What is the square footage of flooring needed? =_ How many rooms will you need the bamboo flooring in? = {(),1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50} Will you need a professional to tear out the old floor? = () Yes () No () Not Sure Would you like the bamboo flooring to be eco-friendly?= () Yes () No () Unsure
Wooden floor - less traction
I'm interested in adding a bathtub liner to my tub. I'm not very familiar with them. How much would it cost to install a bathtub liner?
One can use Expoxy floor paint on concrete floors. Typically this would be used in a garage but could be applied to other floors made from concrete. One can purchase it from Home Depot.
I would not use any liquid cleaner on wood floors. If you have dust then sweep the floor. If you get a spill then use paper towels.
Population Density
hi try these.....http://www.riveria-roof-company.co.uk.
They used sawdust (not sure how putting saw dust on a floor is cleaning it).