Pull the light bulbs out and check the bulb sockets for corrosion. If there is none, spend the money and change the bulbs first. Even though a light may work, it could be shorting also. It may also be in the dashboards light system because the tail lights and dash ights run on the same circuitAnswerHas the radio been changed? because also remember there's a wire that goes to the radio and if it not used, may be grounding out on something
A Corvette that was built in late 1976 up to late 1977.
what is the process for installing new seat covers in a 1977 chevrolet corvette
How do I replace the power window switch on 1977 Corvette coupe
Spark plug gap for a 1977 Corvette using ACDelco R45TS is .035
You can find a diagram of a 1977 Corvette horn assembly at your local library. Look in the car repair section for a Corvette repair book.
No, the last year for the Corvette to be called a Stingray was in 1976.
Check out Corvette Forum.Some members have been retro fitting seat belts from 3rd gen camaros.AnswerI have replaced a 1977 corvettes seat belts with a newer model. It is the Corvette Z06.
Yes, the headlights should be completely identical.
That's a vague question. Which Corvette? The new Z06s are rated at a top speed of 205 MPH. I had a 1977 that was highly modified that would that fast or faster.
One may try to purchase a 1977 Corvette online. The best places to search for one would be either Kijiji or eBay. As the vehicle is quite old, it may be quite difficult to find one in person.
I think $8500
The fuse box in the 1977 corvette is on the outside wall under the dash on the drivers side - about as far up in the corner as they could put it.
The 1977 Corvette 350 LS has ignition timing standard in this model. The purpose of the ignition timing is to help start the car in synchrony.
The fuse box on a 1977 corvette is located at the top of the kick panel on the drivers side. It is just below the dash on the outside wall............7T77T7
A roadster is a convertible. The Stingray was the 1969-1977 Corvette model. The 1968 was the same body style, but was not called Stingray.
Bad bulbs?Bad Hi-low switch?
No the back spacing is wrong, c-4 to c-6 does not work, GRR
Horsepower is not a unit of mass.
Every Corvette since the first one has fuel injection. Corvette was the first fuel injected automobile in the US. Every Corvette since the first one has fuel injection. Corvette was the first fuel injected automobile in the US.
The Stingray name was droped for the production year 1977 and never returned. I have a 19977 Corvette born October 1976 and has Stingray on the Body Pannel's. I have tried to find out if this is correct and have been unable to.