There are several reasons why your heat may not work. First your coolant system must be full with NO AIR pockets. There is a bleeder valve for the coolant system, in the area of the coolant recovery bottle, by the strut tower and the firewall. Have the vehicle running and open the valve, be careful coolant can be hot. Make sure you are full of coolant by checking the recovery bottle. If nothing comes out of the vent then you need to wait till coolant comes out.
Another problem could be the heater control valve and or the thermostat. They are in the front center on top just under the cover and the air intake.
The water pump might or the thermostat housing might be leaking, creating a leak that will allow air to enter. The older style of pumps were well known for leaking.
Air in the cooling system. Look up bleeding cooling system.
heat not working
I have a 2000 Chrysler cirrus it only blows cold air on the heat cycle. can someone help me as to why this is happening?
Coolant level.There are many other posts on the topic, you need to check the coolant level and start from there. Chances are you may have a coolant leak. No coolant = no heat.
The heat of working in the field.
The heat of working in the field.
my heat doesnt work in my2000 lincoln ls what causes this
it is a heater. heat. it blows heat. warm air
the fan is working but no heat
heating element stopped working
ive had the same problem. my rear speakers are heat senritive. they only work when the sun is shinning down. dont understand why this happens tho.
heter not working on 2006 gto . i do have air ,but no heat.