it would be the brake light switch about 20 dollars at autozone
change the fuse if not replace flasher
the turn signal switch is probably bad
the brake light switch is out of adjustment. Readjust the switch.
Check bulbs, fuses and brake switch in that order.
Check socket for corrosion-and make sure it is grounded
Yes, or a bad brake switch, a wiring problem, or bad bulbs.
You probably need to replace your brake light switch. It's near the top of the brake assembly, beyond a trim panel. The fact that all three brake lights don't work rules out problems in the multifunction switch (the cause of similar problems affecting only the two rear lights.)
It's the turn signal switch which is the culprit.
brake switch ???
It sounds like a blown fuse or a bad head light switch
If the brake lights on a vehicle do not work on one side, this could be an indication of a blown bulb. Also, some vehicles have front lights that affect the rear lights, so checking for problems in the front lights could help as well.
i would try changing your bulb in the rear of the car first then if it still not working then look for fuse or wiring problem
My rear window brake light works, but not my tail light brakes on my 1997 Monte Carlo. What is the problem?
BAD BRAKE LIGHT SWITCH AT TOP OF BRAKE PEDAL
Rear loom ground not contacting. Bulbs burned out or missing. Brake light switch or connection to it is fubared.
every vehicle must have brake lights to indicate that the vehicle is stopping. with no brake lights the vehicle can cause a rear end collision.
check the fuse for the brake lights, they have thier own. also check the brake light switch at the at the top of the brake petal
check your rear light bulbs. it is a two filament light and one is burned out.
your brake light switch is probably out
Blown fuse or bad brake light switch?
The most likely cause is a bad brake light switch (if none of the brake lights illuminate) but if its only one of the brake lights, try changing the bulb. Even if they still work as running or turn lights because they have a double filament and may still work partially, but not as brake lights.