You probably are having circut board problems, check for shorts in the wires under your main console on the left of your steering near to the floor their should be a pull out plastic tab where you can find the circut board. Try replacing the circts that route electricity to your lights, the circut could be burned out or just acting as a ground because it needs replaced
i got a 2006toyota highlander my tail lights dont work but,every other light works please help me
Look for a fuse labeled TAIL LIGHTS. There are 2 separate circuits, one for brake turn and flasher and the other is for tail lights.
Did you check for a blown fuse? Look for one marked TAIL LIGHTS. This is the one that would affect that would affect the tail lights and license plate light.
you need the sensor replaced
Sometimes one part of the bulb can blow but the other part is still intact. Replace the bulb and see if that makes it work again. Just make sure you get the 2 pin staggered offset bulb for tail/brake.
did you check the fuse?
Blown fuse, both lights are burnt out, There is a wiring or ground issue.
No running lights but all other lights work on Chevy 2500 1999 model
94 mercury grand marque dashboard, hazard, and tail lights do not work?
You need a new fuse
I own a ford f150 and my tail lights are not working, but my brake work. What could wire or what could be causing that.
Are you saying your tail lights themselves do not work and only the brake lights work. If that is the case, check the fuse, and then check the tail light bulbs.