You would put a roll cage on a Jeep Scrambler CJ8 by just screwing it onto the front of the car. The process is very easy and most people should be able to do it.
Yes, the entire roll cage in all Jeep Wranglers can simply be unbolted for removal. On model years 1997-2006 (TJ's) you have to take 4 bolts out of the top of the windshield frame that connects to the roll cage.
Yes. But you might have to do some moving around with it if you have a custom roll cage
87-95 was the first generation wrangler, the YJ. The roll cage should be the same as no major changes to the body were made until the TJ (97-03).
A roll cage reinforces the body to the frame. The point of a roll cage is so if the driver crahses, the car won't "pancake".
The roll cage is around the driver, to prevent the roof from collapsing during a roll over crash, and injuring or killing the driver.
because they roll easily...
A safety cage is also known as a roll cage. The function of one is to prevent the roof on a racing car or similar vehicle from caving in in case of a roll over.
form_title=Install a Roll Bar form_header=Roll bars can be a valuable source of protection in the case of an accident. Do you use this car for going off road?= () Yes () No Will you need just the roll bar or a full roll cage?= () Roll Bar () Roll Cage Is your car a convertible?= () Yes () No
Fold the soft top down, Remove 4 torx bolts from the bows and remove them from the brackets on the roll cage. Pull the entire top away from the vehicle to the rear.
A roll cage is what protects the driver if a crash occurs. It's something that is necessary on all racing cars and has been proven to save lives. There are even roll cages on go carts and off road vehicles. If you're looking to get an off-road vehicle, then you should really look into getting a roll cage to cover the back seat as well.
The roll cage is the birdcage on a car.
First, find out if it is legal for you to drive in your area without doors. Many states have laws that specifically limit driving vehicles on the road without doors to vehicles that came that way from the factory. Remember that the Jeep Comanche is a unibody vehicle and that the top is an integral part of the structure of the vehicle. If you plan on cutting the top off, I would highly recommend that you install a roll cage. Because that Jeep has no frame, you would want to bolt the roll cage to the body using a sandwich type plate set up, making sure that the plates you use are different size (so they dont just tighten down cutting through the body)