Wired networking provides you with speeds up to 1,000Mbps where Wireless N tops out around 300Mbps.
Wired also provides the end user with more security as your information is not being transmitted wirelessly. It is easier for people to gain access to your network through wireless.
A simple wired network would require two computers, two network cords, and a hub. You would manually assign consecutive IP Address to each computer. Connecting wired computer to another wired computer would requre a special cable called a cross-over cable. Most Wireless Routers will be pre-configured with a default name and DHCP enabled. You may be able to immediately connect to the router. The router will use DHCP to assign an IP Address to your computer. A few Wireless Routers have a buttons for WPS (Wi-Fi Protected Setup) or AOSS, which allows automatic configuration of your computer, especially if security had been enabled. If you want to start networking as a career than I recommend that you either go to a class that involves CISCO, A+, Novell, You Also may want to go to your local book store. You can also visit sites like COMPTia. If you just want to get certifications in the field of networking than you can go to places like Transdumper.com or testking.com.
Connecting a computer to the internet can be done in a number of ways. A direct connection would be hard wired or plugged in to cable, dsl, or phone access. An indirect connection would use a wireless router or hot spot.
The modem on your computer must connect to your Internet Service Provider's server over a land telephone line. You connect the computer's modem to a telephone jack as you would a telephone.
To connect a computer to other computers (i.e. to a network) you need a network adapter, also called a Network Interface Card. This adapter should be suitable for a network which you want to connect to. Wireless adapters are for wireless networks, wired adapters are for wired networks.A network connection.if its file sharing a local network over your lan, or if its a game, social networking site on the internet its the internet.A network card connnects to a router (wireless or LAN) the the router connects to other computers or a modem (intranet-telephone interface)
It would be networking your computer with another in your house. That would require you to get a network card.
One type of networking job is a networking architect. Others jobs would include a network engineer, IT consultant and a computer support specialist.
I would try the netlink networking tool. This product offers great networking between the computer and the printer at home.
For a home networking system you would need: Ethernet Cables Router and an ISP (internet service provider) 1. connect your ethernet cables to the PC and to the Router 2. Connect to the ISP
You would use cross-wired cables to connect 2 computers together.
A normal crossed ethernet cable will do.
You can get a cable for your camera which would connect to a computer USB port.
There are plenty of websites which offer information about computer networking solutions such as Brennan IT and Geeks2U. Alternatively, one can visit your local computer retailer for specific advice.