The check engine light (service engine soon) comes on and stays on when a problem is detected by the self diagnosis system of your vehicle. Generally, the problem is in the emissions or something that is affecting the effectiveness of the emissions, but other causes can trigger the light to come on, too. To determine the cause, the vehicle will need to be taken to a parts store or a shop that has an OBD2 scanner, or for 1995 and earlier models, an OBD1 scanner, While a scanner will not give you the magic answer, it will give you a code that narrows down the problem area.
when the engine is hot the check engine light came on and the fan(is ok) don't start
probably u-joints on driveshaft
try putting petrol in
Simply turn on the ignition but do not attempt to start the engine. If the light bulb is good you will see the Check Engine light illuminate and stay on. If you do not see the Check Engine light, the bulb is defective or has been removed.
The computer doesn't allow to start the engine. Check the error code.
If the light stays on after start up- you need to check your oil.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Check engine light, low power, no start, runs rough, bent valves,Check engine light, low power, no start, runs rough, bent valves,
yes
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
The check engine light comes on at start up for a bulb check. If it stays on with the engine running the computer has detected a malfunction. You need to have it checked for codes.
The process of elimination works. If you have a check engine light, start there.