So you can kick the door or push it open with your foot without leaving scuff marks. The best plates are made of brass.
_________________________________________________________
The bottom rail is the bottom section of the door itself. A kick plate is a metal plate, usually brass that is on the surface of the door.
A kick plate is a plate, ~8 in high, on the bottom of a door. It prevents damage kicking, vacuuming, mopping, etc.
You can find the 2004 Oldsmobile blend door behind the passenger side kick plate. Remove the kick plate to access the blending door.
no
Same thing...it protects the lower part of a door from damage from mop water or being kicked.
The kick plate is at your feet on the right side of the vehicle. You will need to take off the scuff guard, the flat horizontal piece on the right of seat on the floor. Just pry it off carefully. There are no screws. Then pull the door seal away from the lower front portion of the door and pull the plate out. Again, it has no screws so you will just carefully pry it out.
The kick plate is the plate between the floor and the dashboard in the passenger compartment. The system computer is housed behind the kick plate.
A metal plate installed on the lower portion of a door to protect the door from contact with feet, boots, shoes, roller skates, huaraches, sandals and toenails.
Kick In the Door was created in 1997.
The 1997 Oldsmobile computer is located behind the passenger side kick plate. You will need to remove the passenger side kick plate in order to access the computer.
You can find the 1985 VW heater core behind the drivers side kick plate. You will need to remove the kick plate in order to access the heater core.
The passenger kick panel is the interior trim panel , just in front of the front passengers door , next to the front passengers feet