Usually output of an amplifier is a voltage ,...but in case of Operational Transconductance Amplifier ,Iout (current ) is the output. This feature, makes it useful for Electronic control of amplifier gain .
Originally such an amplifier did mathematical functions.
It doesn't. You can make a differential amplifier with a single power supply.
analog device
operational amplifier
You need a divider that is 10 to 1. You could use 10 megohms in the feedback and 1 megohm in the bottom leg. Since you are probably talking about an operational amplifier, you need this in both legs.
voltage amplifier feedback current amplifier feedback transconductance feedback transresistance feedback
design and implementation of a buffer circuit using operational amplifier
Originally such an amplifier did mathematical functions.
It doesn't. You can make a differential amplifier with a single power supply.
The LM358 is an operational amplifier.
It has several but one of the main ones is that it has built in frequency compensation, which its predecessor the 709 operational amplifier did not.
gm0 is not used in BJT amplifier circuits; it is used in JFET circuits. It is the transconductance at zero gate bias. Since the transconductance varies as the bias is varied, this gives a benchmark level at a given defined point, and other transconductances can be calculated from it as a function of the amount of negative bias on the gate. If it were linear it would be the same everywhere, but it is not.
no
hie
operational amplifier
1.differential amplifier 2.operational amplifier 3.instrumentation amplifier 4.chopper amplifier 5.isolation amplier
analog device