0
Why your car continue lose power even if they jumpstarted you when you switch it off it does not want to start?
Wiki User
∙ 9y ago
The alternator is probably not working so you are running only on battery power. As the battery drains the engine loses power and will not restart if you shut it off. Have your local auto parts store test the charging system and the battery.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
1993 f250 won't start when jumpstarted?
make sure the terminals are clean and the wires aren't damaged.
How do you start a PSP?
Press the power switch in the right
Your 92 camaro wont start replaced starter and ignition switch has power but wont turn over what else could it be?
Check the 92 Camaro neutral safety switch next. If the switch is faulty then the starter will not get power to start the engine.
How do you know if it is the ignition switch or your solonied that is bad in a '88 Ford truck?
Is the selenoid getting power when the switch is turned to the start position? If yes, it's not a switch problem. Is power coming THROUGH the switch and to the starter when the key is turned to start? If not, it's a selenoid problem. If yes, it's a starter problem.
Firebird power windows stop working and then start again?
sounds like you need to replace power window master switch
Having a problem with 1965 impala ignition switch Car will start but then when you shut it off and try to start it again nothing happens Back of switch gets hot when try to start?
The start wire (Purple, if stock) is becoming 'heat resistive' from age. Replace the start wire. The power supply wire is becoming heat resistive from age, check and or replace the power supply to the switch. You can install a bypass switch, or high load relay under the hood as well (a ford solenoid works well for that).
Turn key will not start sometimes will start?
1998 Ford Ranger will have power when I turn the key, sometime no power, why? Then I can wait and some power comes back, changes back and forth. Defective Ignition Switch
Why is there no power to your fuel pump fuse 1984 Chevy Celebrity?
I would expect that the power for the fuel pump would be supplied through the ignition switch so I would start there, that is check the ignition switch.
Why you do not start into high power on a microscopes?
I am going to ignore your poor grammar skills on this one, but here is the answer. You first start on a low power to locate the specimen or bacteria. Then you switch to a high power to get a better look at it. Hope this helps.
Power source for 86 iroc hei distributor?
From Ignition switch run/start position terminal.
Can the ignition switch in a 1990 Chevy pick up cause the transmission to not shift?
NO, there is no coalition between the ignition switch and the transmission. The ignition switch does 2 things. Turns on power to the electrical system for the engine and supplies power to the starter during start-up.
How do you check a clutch start switch?
Use a test light or a multi-meter to check for power going through the switch when it's depressed or for ohms depressed.
