Yes, I just changed a 1985 305CI intake to a new GM 350CI long block crate motor.
The crankshaft has nothing to do with a short are long block. A short block is everything but the heads and intake. A long block has the heads and intake all ready on it, Its the complete engine. You have to put the heads and intake on the short block yourself. That is the difference.
Nothing at all. A long block is the complete engine. A short block is just the engine with no intake, exhaust, or accessories installed.
With a low rise intake, yes. With a high rise, well that depends on how tall of a high rise intake you use. Externally, a 572 is the same size as a 396/427/454, so as long as you don't use an overly tall intake/air cleaner, you should be fine.
yeah as long as u have the intake computer and wireing harness it should work
The g13 long block engine weighs 100 pounds The long block with intake carb etc fully dressed weighs 170 Http://www.sammypro.com
A short block is a engine that has NO heads are intake. Some short blocks don't even have a oil pan and timing cover either. A long block is the entire engine complete.
A long block comes with everything but the intake, Sometimes they will leave the sheet medal off, Oil pan,valve covers, Timing cover. A short block will be just the block,crank,rods and pistons and cam shaft, Timing gears No heads or sheet medal.
you can as long as you use your TBI heads if you want to use the vortec heads with TBI you will need a special intake manifold or a carb manifold with a adapter to mount your throttle body to the carb manifold heres some more info TBI heads will mount to the vortec block TBI intake manifold has 12 bolts vortec intake manifold has 8 bolts
Leave the couch an inch from the wall and you should be fine. As long as air can enter the intake then air will circulate.
As long as the 350 block is under the year 1986. Then all of the external engine parts will interchange. The heads and intake will also interchange. The CRANK AND RODS AND PISTONS WILL NO INTERCHANGE.
So long as the engine is a stock small block, yes - bolt that 4L60E to a turbocharged small block or a big block, and you're going to wreck that transmission quick.
no, the 4.3 liter is a V6