Answer Possibly. The device will not be harmed, but the fan motors and compressor will run slower making it operate below its intended levels. It will not work as wekk on 50hz as it did on 60hz, but it should work. If it has a ice maker with a motorized timer, that will not work correctly. The timer will turn at a different speed altering the timing.
Another Answer
I ran my Canadian 120-V / 60-Hz fridge-freezer for years in the UK, using a 230:120-V transformer at 50 Hz.
I have a Maytag, two door with ice maker, and it works perfectly. Have talked with other expatriates and no one has a problem.
220v 50 Hz refrigerator won't work on 220 60Hz supply....
This may reduce the life of the refrigerator because the pump motor will try to run 20% quicker, which might damage the compressor.
No this will not work you will draw approx. 2.291 amps@275w that is approx.2291 mA
All activity that depends upon an electrical supply to operate will cease. To overcome this type of situation standby generators and uninterrupted power supplies are used until the electrical supply is re-established.
there are positive and negative terminal in electrical device who operate on dc power supply because they wont work if the connection is reversed. but devices who operate on ac usually dosenot have polarity marks .
On a WC macerator installation the electrical supply to the unit should be wired from a switch.
electrical wires are selected to satisfy with the desired conditions and supply.
No this will not work you will draw approx. 2.291 amps@275w that is approx.2291 mA
A starter is an electrical device that requires the proper supply of electricity to operate properly. Weak battery or loose or corroded connections and it will not function properly.
Yes. Stabilizer is to protect the Refrigerator from voltage surges and variations. Invertor is to provide alternate power source backed by batteries, when mains supply fails.
All activity that depends upon an electrical supply to operate will cease. To overcome this type of situation standby generators and uninterrupted power supplies are used until the electrical supply is re-established.
the circuit might not operate properly. but shouldn't effect the circuits them self.
The way you check to see if an under voltage relay is wired properly is to disconnect the electrical supply. If the device that is connected to the load side of the relay does not start up or energize when the electrical supply is reconnected, then the relay is connected correctly.
there are positive and negative terminal in electrical device who operate on dc power supply because they wont work if the connection is reversed. but devices who operate on ac usually dosenot have polarity marks .
Electrical supply boxes can be found from a local electrical warehouse or else try a good electrical supply store online, before you buy it should consult with a registered electrician.
Its function is to supply electrical power via a plug that is plugged into it to supply an appliance.
Testing of an electrical circuit for voltage requires the supply to be energized.
Most tanning beds require 220 volts. Most homes are not wired to supply this kind of power. It is best to call a certified electrician to install a dedicated circuit to avoid the risk of electrical overload.
Appliances that are powered to a mains supply include a refrigerator, cooker, freezer, microwave, toaster and a kettle. The only kitchen appliance that requires a constant supply of electricity running through it is a refrigerator or freezer.