YES, it will fit all right, what changes is the engine to turbo to non turbo but all the bolt and guides will fit perfectly
yes. it has the L28e or L28et. It will fit in any of the Z's. If it's turbo and the other tranny and rear end you have are for a non-turbo then you need the turbo tranny and rear end
I have a 350 turbo in mine Just about any transmission will work! Powerglide, Turbo 350 (lockup or non) or Turbo 400, even 700r4.
Yes, but the flywheel and pressure plate is diferent between turbo and non turbo.
no only 95-99 but if yours is turbo tsi only can put one in from another tsi turbo if its a 420a non turbo put one in from another non turbo esi
yes
Yes it will, the w58 tranny which came with the non turbo 7m will fit using the 2jzge bellhousing, and the r154 which came with the turbo 7m will fit using the 1jz bellhousing.
yes
no...they are different...it wont fit the block of a non turbo 4d56 engine...
Yes. For the most part all 1979-1983 280zx transmissions are pretty much the same, manual to manual and auto to auto. The turbo transmission from 81-83 however is a Borg Warner T-5 style toploader. Something tells me through experience is that they will bolt up to a non turbo motor, but the driveshafts and rear end will need to be changed. Also, be aware that the older Z's from 70-78 will bolt up, but the driveshafts would definitely need to be swapped, especially if you are putting a 4 speed into it for whatever reason.
no .. transmissions are reversed..
they are the exactly the same, so yes a turbo engine will fit in a non turbo talon
If from the same size engine, then yes. 2.5 and 2.2 Turbos and Non Turbos transmissions will all bolt right up, I currently have my 2.2 non turbo TBI transmission on my 2.5 Turbo engine. It is possible.