yes
yes! depending on the block. ie. a 350 or 305 will work with newer heads and intakes. as long as you have the correct gasket. the heads can not be reverse flow. they will not work without modification.
The heads will fit the block, but the vortec intake manifold will not bolt to the old style heads.
yes
Chevy in 1977 changed the rear main oil seal to a one piece seal. the older crankshaft wont work.
YES. The heads will bolt right on.
lt1 is a 350
Other 2.2 heads u cant change it cause of the block
The 85 intake manifold won't work with the 90 heads, so you will need to purchase an aftermarket intake if you want to use a carburetor or use a 87 to 95 intake if you want to change over to TBI.
To make a crankshaft position sensor work on a 1997 Honda passport with a 1995 block and 1997 heads will take a lot of work. You will have to redo everything under the hood.
yes, gt40 heads should work on a 351 windsor. they should work on any small block ford from a 260 to the 351 windsor. Good luck!
heads will bolt on but will not work. the combustion chamber is too small resultingin too much compression.most anything else (brackets,exhaust accessories etc.)will work
Answer The 86 Chevy block and the 87 Chevy block are the exact same block, nothing changed, it will fit perfectly.yes