0
yes
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Will regular old style 305 heads work on a newer vortec 305 block?
The heads will fit the block, but the vortec intake manifold will not bolt to the old style heads.
Will 305 cylinders work on a 350 block?
YES. The heads will bolt right on.
Would it be ok to put 305 heads on a 307 block?
Yes, I've got a 307 running 305 heads in my old truck. I read somewhere it's actually worth a few extra horsepower
Will a 76 short block work with 92 heads and intake?
yes! depending on the block. ie. a 350 or 305 will work with newer heads and intakes. as long as you have the correct gasket. the heads can not be reverse flow. they will not work without modification.
Can 1977 305 heads fit on a 350 block. and what other suff from a 305 fit to a 350 block?
heads will bolt on but will not work. the combustion chamber is too small resultingin too much compression.most anything else (brackets,exhaust accessories etc.)will work
Whats the difference between a 305 truck engine block and a 305 car engine block?
THE CAM, THE HEADS, AND THE PISTONS ARE DIFFERENT FOR EACH VEHICLE. EXAMPLE A 5.7 CORVETTE HAS DIFFERENT NEEDS THAN A 5.7 K1500 SILVARADO. TRUCK HAS 190HP AND THE VETTE HAS 350HP THERE ARE OTHER DIFFERENCES BUT THE CAM AND THE HEADS ARE THE MAIN FACTORS. HOPE THIS HELPS..
Will a block from a 350 5.7 work with heads from a 305 5.0 and 305 intake 1998 If the 350 is not a vortec?
No it Has a different bolt pattern because of the engine size
Do the intake bolts bolt in the top of the block or into the heads on a 305 vortec?
Into the heads only.
Can you put a set of 307 heads on a 305 block?
Yes you can.
Is it possible to install 305 vortex heads on 350 block?
Yes their the same block....
Do 305 and 307 small block Chevy engine heads fit a 1964 283 cu in block?
Yes, they should fit ok. 305 heads should bump up the compression a little.
Will 305 heads make more horsepower on a 350 1990ish motor with carb conversion?
No. 305's have small valves due to the 305's small bore. Large valve heads can't be used on the 305 because the valves will hit the cylinder block. 350 heads breathe MUCH better than 305 heads. Stick with the 350 heads.
