No
To find the percentage of 28 out of 350, you would divide 28 by 350 and then multiply by 100. The calculation would be (28 ÷ 350) x 100 = 8%. Therefore, 28 is 8% of 350.
0.08
The answer is 28 (350 / 100 x 8 = 28)
28 x 12.50 = 350
%rate = (98/350) x 100% = 28%
28
there should be a thin guard usually stainless steel that fits over the guides for lining up the tranny. between engine and transmission.
The 2009 Lexus ES-350 has a drag coefficient of .28 Cd.
The 2008 Lexus ES-350 has a drag coefficient of .28 Cd.
The 2007 Lexus ES-350 has a drag coefficient of .28 Cd.
The 1987 Camaro Z 28 350 cubic inch engine stock horsepower is 280. The 1987 Camaro Z 28 350 cubic inch engine was the largest engine offered for that model year.
"Being you say it is a 1982 K-10 I will give the information based on it being original. The axles are both GM 10 bolts, 8.5" ring gear, 1.280" axle shaft diameter, 28 spline, open differential. The gears are very likely 3.08 since GM was stuck on using very tall gearing. They even did something stupid and used the 3.08 gears with the 700R4 (1982 was the first year for its use). I have a 1982 Blazer with the 6.2L, 700R4, and 3.08 gears; overdrive is absolutely worthless with those gears. The transfer case is most likely the NP208 aluminum case, chain drive front output. Not knowing what engine you have (250 I-6, or V8 305 or 350, or 6.2L Diesel) I will list possible transmissions: 700R4, or TH350, or SM465, or there were some other possible transmissions used with the I-6."Copied