No
Not really because motors are designed to run at either 50 or 60 Hz and the wrong frequency might cause them to malfunction or overheat.
yes, the voltage and frequency are both nominal. As long as your within 10% of the rated voltage and frequency of the name plate you will be good. 50Hz and 60Hz are not within 10% of each other. I do not think it will work. u also run the risk of burn out because it will run faster
It depends on the TV; you'll have to check the specification of the TV in question.
Yes no problem the transformer should run a little cooler as well.
What effect will be there on the motor (Induction) output power when a 100kW 50hz motor is connected to a 60hz power supply.
Yes, most VFDs can run faster than the input power frequency so you can run a motor to 60Hz with a 50Hz power source. Just be aware that as speed increases, so will the current. Also be aware that a motor is rated to run a specific rpm and running faster may cause motor bearing failure after a short time.
Yes. It will make your motor a little faster though, so it depends on what you are powering with this motor. IE Can the piece of eguipment be ran faster?
Depends. Some smaller stuff can usually run on both, in which case it will be printed on them. If it isn't, you can't run a 220v item on 110v.
The voltage isn't a problem, you can run 220 from your house and use that to run a European appliance, the problem is whether the appliance is dependant on line HZ. European is 50HZ and US is 60HZ. If the appliance specifies 220/50HZ, it will probably give you trouble here. If it says 220V/50 or 60HZ
the 50Hz things have a bit more iron and copper will run a bit cooler at 60hz