Not very likely at all this door would fit.
See "Related Questions" below for more
You can not open the rear hatch door from the inside.
On a 2001 Ford Windstar : The liftgate is the big door at the rear of the vehicle that opens by going up
no - every Windstar came with at least 1 side door (1995-1998) and 2 side doors 1999-2003 - all along with the rear hatch.
To open the rear hatch door of a 2001 Toyota Sequoia, first ensure that the vehicle is in the "Park" position. Locate the rear hatch release button on the driver's side or use the key fob to unlock the door. If the hatch is still locked, you can manually unlock it using the key in the lock located on the hatch itself. Once unlocked, simply lift the hatch to open it.
There is no inside "trunk" - rear hatch release button on the Windstar.The only way to open it is at the rear hatch itself.
On a 1999 Ford Windstar, the expansion valve is located just inside the rear hatch of the rear panel on the driver's side. It is connected to the rear evaporator core.
if it is open, a spoiler! ======================================= The liftgate
what are the wires for on the rear hatch door hydraulic pumps
15.0 liters ( 15.9 quarts ) according to the 2001 Ford Windstar Owner Guide - cooling system capacity with rear heater
The rear hatch on a 1998 dodge durango won't open
To open the rear hatch on a 2001 Isuzu Rodeo, first ensure the vehicle is unlocked. Then, locate the latch located at the center of the hatch; you can either pull the handle or press the release button on the key fob if equipped. If the hatch is still stuck, check for any obstructions or issues with the latch mechanism. If needed, you can manually unlock the hatch from the inside by accessing the interior release lever.
To open the rear windows on a 2001 Ford Windstar, locate the window controls on the driver's side door panel. The rear windows are operated by switches located on the panel. Simply press the appropriate switch down to open the window and pull it up to close. If the windows are manual, you’ll need to use the crank handle located on the window frame.