0
no, the threading is different
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Who has any info on Charles Daly cap and ball long gun?
Ask Charles himself at charlesdaly.com
Does a Remington 870 12 gauge forend fit on a 20 gauge 870?
12gauge magazine cap fit on a 2ogauge 870 mag cap
How do you change the barrel on a Remington 870?
first cock the pump down then unscrew the magazine cap then the barrel should slide out
How do you take the plug out of a Charles Daly shotgun?
just unscrew the endcap to the magazine tube and insert a small flat-tip screwdriver and push and turn, the spring and plastic plug can then be removed.
How do you remove the plug from a Remington 870 express?
To remove the plug on a Remington 870 series all you need to do is unscrew the cap on the end of the magazine tube. Carefully because it holds in the magazine spring. the plug is the rod that is inserted in the spring so it cannot compress fully to limit capacity so just take it out and screw the cap back on (the cap compresses the spring) and voila. takes about twenty seconds.
Should the barrel on a Remington 870 wiggle?
No - something is amiss. If the magazine cap (front of the forearm) is tightly screwed on then the barrel should be tight.
How do you remove the forestock on an 870 Remington shotgun?
Unscrew the magazine tube cap, pull the barrel off to the front, remove the forestock. If in doubt, consult the owner's manual. A replacement owners manual is available through Remington's web page.
How do you remove a shotgun plug from a Charles daly?
remove magazine cap get a medium or large flat srewdriver push down on the plastic piece t1/4 turn clock wise and the spring and will come out refer to your owners manual if you dont have one go to a place that sells the gun and ask to see a manual.
I just bought a Remington 870 express It has an orange cap on the magazine where you load the shells and no instruction on how to remove it Help?
I assume you want to remove the orange colored magazine follower? If so, you first need to unscrew the end-cap on the front end of the magazine tube. Looking into the front end of the magazine tube you will see a split bushing with a hole in the center of it. Carefully, very carefully, pry this end-cap out of the magazine tube. The reason you need to be careful is that this split end-cap is under pressure from the compressed magazine tube spring and once you remove the end-cap the spring will come out quickly. Once the spring is out you can then remove the orange end-cap. There may be a shotshell restricter (plug) inside the spring that restricts the magazine tube to only hold three rounds. This is a green plastic plug and can also be removed now.
How do you take the plug out of a Remington 1100?
Remove the magazine cap and forearm, then remove the barrel and mag tube. At the end of the tube will be a metal cap that you can carefully pry out with a screwdriver, some press in and turn to remove them. Use caution, it is under spring pressure.
How do you insert a plug for a Remington 870 shotgun?
On the end of the magazine tube there is a threaded-on cap. Remove this cap. You will now find a "spring plug" inside the front end of the magazine tube. Carefully pry this spring plug out of the magazine tube. Put a pair of safety glasses in the proper location on your face because once you get this spring cap close to the end of the magazine tube the magazine follwer spring will push it out of the mag. tube faster than you can say"Oh sh.. crap". Once this spring cap is out you can pull the magazine spring out if it already hasn't landed in the living room. You can now insert or remove a cartridge number restricting plug. Next you'll need to push the extended magazine spring back into the magazine tube and re-install the spring end cap. To get the spring plug in flush with the front edge of the magazine tube, tap it into place with a plastic screwdriver handle to prevent distorting the thin walls of the mag. tube. Replace the screw-on end cap and that's it.
How many bullets fit in a Remington 22 cap pump rifle?
Not sure what a "22 cap" pump is. The magazine capacity of a Remington pump rifle will depend on which MODEL, and whether you are loading 22 LR, 22 Long, or 22 Short. The Model 121A holds 20 Shorts, 15 longs, or 14 Long Rifle cartridges. A model 12 would hold 15, 12, or 10.
