0
What else can I help you with?
My 87 Honda accord brake hazards and signal lights stopped working I changed signal and brake light fuses the brakes lights are working but not signal and hazards.?
Probably the flasher unit needs to be replaced. This is an electronic switch which usually mounts underneath the dashboard.
I have a 1989 caprce classic. The signal lights do not work. The hazzard lights work .The brake lihgts work.?
Look for either a blown fuse or replace flasher unit for the signal lights (it is separate from the hazard lights flasher unit).
Will a bad turn signal flasher keep the brake light from working?
A bad turn signal flasher typically won't prevent the brake lights from working, as they operate on separate circuits. The flasher is specifically responsible for the turn signals, while the brake lights have their own switch and wiring. However, if there's a more extensive electrical issue or a shared ground problem, it could potentially affect both systems. It's best to troubleshoot each component individually to identify the exact cause of any malfunction.
Why are your brake lights and hazard lights not working on a 99 Chevy turn signals and top brake light is working fine?
turn signal switch needs replaced!
1979 Dodge B200 Sportsman V8 brake pedal makes all signal lights come on with brake lights the hazards or signals don't work on their own could it be a flasher?
On the 1979 B200 Sportsman V8 if the brake pedal makes all signal lights come on and hazards and flashers do not work on their own, it could be the flasher, but the culprit could also be a burned out bulb or a short in the wiring.
You changed the Flasher fuse and the kick plate flasher fuse is fine in a 97 Cherokee why do left turn signal interior display and brake lights still malfunction?
It could be the turn signal switch in the steering column.
Where is the relays or flasher switch for the turn signal and brake lights on a 1995 Mitsubishi Montero?
The 1995 Mitsubishi flasher relay switch and the brake light relay switch can be found beneath the dashboard. Both switches will be on the drivers side of the dashboard, near the brake pedal.
All lights work except the brake lights and 4 ways you replaced the brake switch and flasher still nothing Is there a relay or something I are missing?
The turn signal switch overrides the brake light circuit while the turn signals are on. If the switch is damaged or worn out the brake lights won't work.
Could it be a short if the brake lights and turn signals do not work on a '99 Neon?
A short would blow a fuse. I would check the flasher which is under the eash on the drivers side. The emergency flasher is different from the turn signal flasher.
Why don't your signal litghts work on your 1998 Chevy lumina my brake lights work jus the turnin signals do not I replaced the fuses and the light bulbs?
Replace the signal flasher relay.
What causes the tail lights not to work on a 1995 Chevy Tahoe when the turn signal and brake lights do work?
either dimmer switch or blown fuse If you are saying that the tail brake lights are working but the third brake light is not....It may be a defective turn signal switch in the steering column.
Why are the brake lights on a 96 ElDorado not working if the fuses and bulbs are good but the hazard lights are bad?
It needs checked out but both the hazard and brake lights go through the turn signal switch.
