answersLogoWhite

0

No, as long as the string is attached properly and the tuning peg itself doesn't slip.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you tune to drop D?

Drop D tuning means that the Low E string is tuned down to a D note. There are a few methods of quickly tuning down. 1. Play the open D-String (4th string) and tune down the E-String (6th string) to match in pitch. Tuning by ear isn't always 100% accurate - but if you have a good ear this is a quick way to achieve "Drop-D" tuning. 2. Use an electronic tuner. Tune your Low E string down one whole step to D. 3. Cheat. Use a "Drop D Capo". While you aren't really "tuning' your guitar - you can simply slip on a capo and have the dropped tuning sound. Most guitar stores will sell Drop D Capo's. 4. Use a Drop D tuner. You will have to replace the tuning mechanism on your guitars headstock with a specialized drop d tuner. With the flick of a lever you can change between the E and D notes. 5. most guitarists i know tend to know what is the pitch of most notes are but that is not the best way to tune a guitar. when you have your guitar in tune by using a tuner or the way i like to do it is i play along to a record that has a power chord with the route note on the low e string in standard tuning and listen very carefully and think is that the exact sound. remembering your just listening for that route note. if it isn't you will need to hand tune it and play it again until you find that perfect sound. after you have done that, u can play the 5th fret on the low e string and play the a string straight after. you then tune the a string to sound like the 5th fret of the low e string. u carry on doing that apart from the 2nd b string which u play the 4th fret of the g instead of the 5th. after all that your guitar is now in tune. now you want to tune it to drop d. you do it by putting your finger on the 7th fret on the low e string and playing it. then you play the a string straight after. then you will tune the low e string to sound like the a string. The standard tuning on a guitar is EADGBE from the fat string to the thin string. In order to tune to drop d, lower the first string (the fattest one) so that it is a whole step down. Then your guitar will be tuned DADGBE. Note that the 1st and 3rd strings are now the same pitch (just an octave apart) so you can use that third string to check your intonation. Drop D Tuning is where you tune the 6th string (The large E string) Down to a D note, so that it is one octave lower than the 4th string. This is used to create a heavier sound effect. Once in Drop D tuning, you can fret the 4,5,6 strings all on the same fret to produce the chords instead of doing the standard "power" chords. If you're talking guitar, I think you're saying how do you tune to D? You lower your 6 string to D. In other words take your low E down to D. It works well while playing certain chords, doubling the note "D". Especially the D chord giving a full sounding D chord with a D bass note. Basically, make your low top string sound like your 3rd string. You should be tuning the low top string down to make it the same note as your 3rd string. Simply put. haha.


How do you make a bows string?

Take any high test kind of string and tie a non slip loop knot on either end. Make sure the string is short enough to stay tight on the bow, but not to tight. If the bow is home-made, unstring it when not in use. When i made a bow i just used some string and it hasn't failed me yet.


What is the best way to hang 1000 paper cranes?

On a string. Poke a hole through the middle (there is a hole at the bottom, so make a hole over that). Slip a string through it with a needle if you can. Put them on multiple strings if possible.


Trying to find a address on person who own a range rover?

find a bent coppa and slip him/her £20 for a search of the pnc. ;-)


How do you calculate the circumference of a balloon?

Balloons are rarely (if ever) spherical, so you need to decide what you mean by its circumference.On possible way is to make a slip-knot noose with a piece of string. Slide the noose over the balloon, keeping the string tight. The noose will be opened to the extent of the balloon's circumference.


What is the challenge of climbing Everest?

try not to slip of cause the snow will make you slip


How do you fix a clasp on a locket?

Are you sure you want to try this yourself? You will need jeweler's pliers and a slip ring. A local hobby shop can supply these items for under 10 dollars. Look carefully at the end of the necklace. There should be a tiny silver or gold piece of metal on the end at the bead or gem. With your pliers, carefully squeeze this piece in the opposite direction that it is flattened. This will remove the slip ring that was in place. Now if there is enough string left on the necklace, do this. First put the new slip ring on the string then run the string through the hole in the clasp. Now put the end of the string into the slip ring...you have the ring on the string and the end pushed through it too. Carefully flatten the ring with the pliers until the slip ring is as flat as possible. This will hold your clasp on the necklace securely. If this is not feasible and your necklace is valuable, see a jewelry repair person. The fee is reasonable to have the clasp replaced.


How do you get a lizard across a rope?

Take cardboard stock and make a triangle and tape it then tape 2 balloons to either side blow them up and tie them shut with string put lizard in put cardboard stock and let it slip into fishing line then let them both go Take cardboard stock and make a triangle and tape it then tape 2 balloons to either side blow them up and tie them shut with string put lizard in put cardboard stock and let it slip into fishing line then let them both go


How do you tighten a yo-yo string?

There are several ways to put the string on your Yo-Yo, here is one. A yo-yo string is one long string, folded in half, and twisted. The end where the two string meets are tied together to make a loop, eventually used to make a slip knot for your finger. The other end, where the string is folded together is where the yo-yo sits. Untwist the folded end with your fingers in order to separate the two strings. Untwist it large enough that the yo-yo can be placed between the strings, so that a single string sits on the axle of the yo-yo, as shown below. Then simply let the yo-yo string re-twist together. The string is now installed on the yo-yo.


Why does pitch change in guitar?

If your guitar is going out of tune, there are a variety of reasons you could look into:Temperature. Changes in the temperature of the guitar can affect how a guitar remains in tune. Wait until the instrument is at the room temperature before tuning it.Improper string winding at the tuner. If the strings are not wound properly around the tuner, they can slip and drop in pitch. You should try to wind the string around the tuner post 2-3 times to ensure a solid hold.Poor tuners. If you have low-quality tuners, the internal gears will slip, causing the pitch to drop.New strings. If you just put new strings on your guitar, you have to stretch them out in order for them to remain in tune.


What would make transmission slip when turning left on a 92 tempo?

What would make my transmission slip on a Dodge truck when turning left


Can you have a sentence with the word slip?

I don't see any way to slip the word into a sentence. The ceramicist placed the slip in the kiln to make his new coffee cup. There will be no refunds without a sales slip.