No. generally a booster pump is used to run a pressure side cleaner.
no you need a stronger heater specifically designed for a swimming pool
Heat pump pool heaters use electricity to capture heat. As the pool pump circulates the water, it is drawn from the pool and through a filter and into the heat pump heater. The heater itself has a fan that pulls in outside air and pushes it over the evaporator coil. At this point liquid refrigerant in the evaporator coil absorbs the heat from the outside air converting it into a gas. The gas is then passed through the compressor where it increases the heat. This very hot gas is then sent through the condenser where the hot gas is transferred to the cool pool water circulating through the heater. The heated water is then returned to the pool. A pool heater on the other hand uses the gas directly to heat the water by fueling the combustion chamber.
i have a 5ft pool and have a intex 3kw heater how long will it take to heat pool to a good swimm tempature
130000 btu
400k btu
Thermal pool covers prevent water from evaporating. They help in locking the heat in the pool. So, the water stays hot for longer time. Unlike regular pool covers, thermal pool covers are made of special thermoplastic material, which attracts sun rays. So, the cover functions as solar heater and warms up the water using natural solar energy. So, thought you spend a little more for thermal pool covers, they help in saving electricity and water bills in the long run.
The sun, pool heater, microwave, fireplace
It works this way. Even if you could set the thermostat at 200 it will not heat the water any quicker. It sounds as if you have an undersized heater. A larger heater will heat the water faster if your system can upgrade to the larger size heater. Your house will not heat up any faster if you set the thermostat to maximum. It is the output capacity of the heater that determines how fast it will heat. What dictates heater size is: the size of the gas line. the length of the gas line run from the meter to the heater. the size of the meter. how many GPM the pump is producing. the GPM capacity of the filter. the size of the plumbing in you pool ~ 1.5"; 2"; 3" total gallons in the pool. are among a few. Just common sense here...... k
Electric pool heaters use electricity to capture heat. As the pool pump circulates the water, it is drawn from the pool and through a filter and into the heat pump heater. The heater itself has a fan that pulls in outside air and pushes it over the evaporator coil. At this point liquid refrigerant in the evaporator coil absorbs the heat from the outside air converting it into a gas. The gas is then passed through the compressor where it increases the heat. This very hot gas is then sent through the condenser where the hot gas is transferred to the cool pool water circulating through the heater. The heated water is then returned to the pool.A gas pool heater on the other hand uses the gas directly to heat the water by fueling the combustion chamber.
The answer will depend on where in the world the pool is.
Some pool heaters have an internal bypass valve that improves efficiency by limiting the amount of water flowing through the heat exchanger. These can stick so that water flow mostly bypasses the heat exchanger...the heater gets hot but very little heat is transferred to the pool.Other answerers have suggested the following:Your airflow over the pool is cooling the water even as it is being heatedYou may not be running the pool pump long enough. Is the heater not maintaining temp? Is the thermostat turned up? Is the filter clean? When was the last time it was back washed or cleaned?You may be using the wrong size heater for your pool and the water to heat ratio that your heater is made to work with may be out.
The most popular pool heater is Heatpro heaters and another popular choice is Sunzak. Both heat up the pool at night by using a solar heat catching device during the day that disperses the heat at night.