you may need 2 modify the engine mounts, aside from that just make sure it fits
To find the engine number on a Corsa B, locate the engine oil dipstick. Look behind the dipstick and there is a flange just below where the first bend in the dipstick is. This flange will have the engine number. Some models of the Corsa B might have the engine number below the intake manifold on the front of the motor.
up to a 2lt standard turbo
yes it will fit with some changes basicaly only use block and head change all sensors and manifolds Just did 1 of these over the weekend as above but 1 stud needs removing from the inlet manifold side if all the electrics come from the z10xe (corsa c) engine including the corsa c ecu and coilpack your all set to go.
i use 10w 40 for my corsa b 1 litre
Sensor is a push fit into the flexible pipe between the air filter box and the engine inlet.Just unclip the wiring connector and pull it out.
Standard Corsa Wheel Trims on the Corsa B Model are 13 Inch Standard Corsa Wheel Trims on the Corsa B Model are 13 Inch Standard Corsa Wheel Trims on the Corsa B Model are 13 Inch
For the Opal Corsa generation Corsa B, 1.4 i petrol engine, the compression ratio is 9.4. It has 60 horsepower and a 46 liter fuel tank. For the 1.4 XER, the compression ratio is 10.5. For the 1.4 i 16V ECOTEC, the compression is 10.5.
The icv is located next to the rev cable.
trying to find out myself, but my 1999 corsa b is at 127,000 with service history and only now beginning to have parts dying. hope this helps
Normal
what are the torque settings for opel corsa b 13 ne