Want this question answered?
Depends on the model
NO... The 96 model transmission WILL ONLY FIT A 96 YEAR TRUCK. Hears the years that will fit. 1993,1994 1995,1998,1999
No, it will not fit 94 model.
A flat or "straight" head screw driver is designed to fit screws a compatible indentation on the head of said screw. note: an advantage of a flat head is that it allows for more torque to be applied, as there is less room for it to move, and has to scalable edges like a Philips head.
Remove the head and fit a new gasket. You may also need the head surface machined flat.
only if you have torqconverter with it
It is not a direct fit.
If they are of the same model.
Possibly. Look at the model # on each transmission. If they are the same, then they are interchangeable.
The transmission is housed inside the engine cases. The 04 R1 has a redesigned engine that is not the same as the 2000 model, I'm sure it wont fit.
Yes a d15b7 head will fit onto a d16y7 block. The Y7 engine is a later model so it is recommended to use the later model computer system.
Yes. There were no major changes between the two. NEW ANSWER: Yes it will fit. But the problem is that the 1990 computer and transmission wiring harness will not operate that 1993 model 4L60E or the 4L80E transmission. Your 1990 model had the 700R4 in it and that is not electronic controlled like the 93 is.