Since the mod 37 is a pump gun and the 51 is semi-auto, if it fits then it is a coincidence.
You want product #172820A at numrich gun parts corp.
A model 7 stock would not fit a 600 Mohawk. The stock and the trigger guard do not line up correctly, although the stock may fit on the gun.
Please give us the MAKE of gun in a repost.
Try e-gunparts.com, gun show, gun shop, want ad.
The primary differences are as follows; # The Trap Gun will be marked as such on the bolt (engraved into the steel). # The Trap Gun will most often have an English style straight grip butt stock versus the standard pistol grip butt stock on a Field grade gun. # The Trap Gun will always have a better grade of walnut stocks, and will often have an ebony diamond inlayed in the wrist of the butt stock on both sides. Frequently, the stocks were also checkered.
Yes. It has a white forearm and butt-stock with a blue barrel and receiver.
On line auctions, gun shops, gun shows, pawn shops.
your western field shotgun was made for Montgomery wards by mossberg.There model number was 395K.I would look at numrich gun parts corp, or maybe E-gun parts,Both are on the web.
It is the end of the stock as opposed to the end of the barrel end of the gun
Remove the butt plate. There is a hold in the stock under the butt plate. The stock bolt can be seen at the bottom of the hole. Obtain or make a screwdriver (or socket, if it is a hex nut) to fit the bolt slot. Be very careful to not let the screwdriver slip out of the slot when you are unscrewing the bolt or else you can go right through the side of the stock and ruin it.
Remove the butt plate and you'll see a hole. Down the hole is a nut on a threaded rod, holding the butt onto the gun. Remove the nut = remove the stock.
It is called the "butt stock".